Abstract:Investigation route of 3D‐printed G‐Polymer. The ever‐increasing demand for additive manufacturing (AM) is driven by the technology's rapid prototyping and flexible manufacturing benefits. Among the various AM techniques, fused filament fabrication (FFF) is one of the most commonly used techniques, in which thermoplastic polymer filaments are deposited layer by layer to create the final part. This technique has been used extensively in various sectors. However, new materials have yet to be developed for use in FFF. This research aims to introduce a new biodegradable highly amorphous polyvinyl alcohol (HAVOH), commercially known as G‐Polymer (GP), into the scope of FFF, to propose a process window for the fabrication of parts with enhanced mechanical properties and to discover the process‐structure–property relationship for this material. This study investigates the effect of five key parameters in GP FFF, including raster angle, number of contours, nozzle temperature, build platform temperature, and print speed. The results of the chemical, thermal, and thermo‐mechanical analysis of the filaments before and after hot extrusion of the 3D printer nozzle showed a significant increase in the mechanical properties of the hot‐extruded filaments. In addition, the mechanical characterization of 3D printed parts showed that increasing the number of contours can improve the mechanical properties of parts, while the raster angle can have a complex effect. The mechanical properties of the parts are also improved by reducing the temperature of the nozzle and the build platform. Printing speed, as an essential parameter in AM, was related to the previously mentioned parameters, and the results showed that increasing the printing speed could improve the UTS and Young's modulus of the 3D printed part. Highlights A novel biodegradable polymer (HAVOH) was introduced into the scope of FFF. The hot extruded G‐Polymer filament from the nozzle showed improved mechanical properties. 180°C nozzle and room temperature platform resulted in improved mechanical properties. 3D printed parts with +45°/−45° raster angle show improved mechanical properties 110 mm/s print speed results in higher mechanical strength than 70 mm/s print speed.

3D printing of polypropylene using the fused filament fabrication technique

Basalt fiber reinforced polypropylene to manufacture 3D printed composites

Polypropylene with clay–filled for fused filament fabrication: comparative study of the mechanical performance of injected and 3d printed composite

Development of a Polypropylene-Based Material with Flame-Retardant Properties for 3D Printing

Recycled polypropylene blends as novel 3D printing materials

Short basalt fibre reinforced recycled polypropylene filaments for 3D printing

On the 3D printing of polypropylene and post-processing optimization of thermomechanical properties

Development of 3D printing short carbon fiber reinforced polypropylene composite filaments

Sustainable Polymer Composites Manufacturing through 3D Printing Technologies by Using Recycled Polymer and Filler

On the Mechanical Response of Silicon Dioxide Nanofiller Concentration on Fused Filament Fabrication 3D Printed Isotactic Polypropylene Nanocomposites

Investigation of the Manufacturing Orientation Impact on the Mechanical Properties of Composite Fiber-Reinforced Polymer Elements in the Fused Filament Fabrication Process

Designing 3D printable polypropylene: Material and process optimisation through rheology

Designing Prepregnation and Fused Filament Fabrication Parameters for Recycled PP- and PA-Based Continuous Carbon Fiber Composites

Glass Powder Additive on Recycled Polypropylene Filaments: A Sustainable Material in 3D Printing

Ternary Blends of Polypropylene Copolymer, Polyethylene and Thermoplastic Polyurethane for Fused Deposition Modeling Three-Dimensional Printing Technology: Preparation, Printing and Properties

PRODUCTION OF FIBER AS AN INPUT MATERIAL FOR THE 3D PRINTING PROCESS

Mechanical properties of PLA-graphene filament for FDM 3D printing

The process‐structure–property relationship of 3D printed G‐Polymer using fused filament fabrication technique

Thinking Green on 3D Printing: Sustainable Polymer Compositions of Post-Consumer Polypropylene and Tire Rubber Crumbs Intended for Industrial Applications

Material Characterizations of the Polymers Reinforced with Recycled Flexible Plastic Blends as Filament for 3D Printing