Abstract:A cement paste or mortar is composed of a mineral skeleton with micron to millimeter-sized grains, surrounded by water filaments. The cohesion or shear resistance in the cement paste and mortar is caused by capillary forces of action. In the case of mortar mixes, there is friction between the particles. Therefore, the mortar mixture shows both friction between particles and cohesion, while the paste shows only cohesion, and the friction between particles is negligible. The property of the cement paste is greatly influenced by the rheological characteristics like cohesion and internal angle friction. It is also interesting that when studying the rheology of fresh concrete, the rheological behavior of cement paste and mortar has direct applicability. In this paper, the rheological characteristics of cement paste and mortar with and without mineral admixtures, that is, fly ash and ground granulated blast-furnace slag (GGBS), were studied. A cement mortar mix with a cement-to-sand ratio of 1:3 was investigated, including fly ash replacement from 10% to 40%, and GGBS from 10% to 70% of the weight of the cement. A suitable blend of fly ash, GGBS, and ordinary Portland cement (OPC) was also selected to determine rheological parameters. For mortar mixtures, the flow table was conducted for workability studies. The flexural and split tensile strength tests were conducted on various mortar mixtures for different curing times. The results indicate that in the presence of a mineral mixture of fly ash and GGBS, the rheological behavior of paste and mortar is similar. Compared with OPC-GGBS-based mixtures, both cement with fly ash and ternary mixtures show less shear resistance or impact resistance. The rheological behavior of the mortar also matches the rheological behavior in the flow table test. Therefore, it is easy to use the vane shear test equipment to conduct cohesion studies to understand the properties of cement paste and mortar using mineral admixtures. The strength results show that the long-term strength of GGBS-based mixtures and ternary mixed mixtures is better than that of fly-ash-based mixtures. For all mixtures, the strength characteristics are greatest at a w/b ratio of 0.6.

Mix Design Method for Coating Mixed Mortar According to Influence of the Aggregate Type and Application Environment Conditions

The Synergy Effect of Limestone Powder and Mineral Admixtures on the Mechanical Property of Mortar

Evaluation of tensile adhesion strength in mortar for coating with incorporation of crushing sand

Effects of Particle Size Distribution of Standard Sands on the Physical-Mechanical Properties of Mortars

Durability for coating mortars: Review of methodologies

Evaluation of Technological Properties of Mortars with the Addition of Plaster Byproduct

Effect of the Paste Coating Layer and Mortar Coating Layer on the Properties of Fresh Self-Compacting Concrete

Formulation parameters effects on the performances of concrete equivalent mortars incorporating different ratios of recycled sand

Development of Mortars That Use Recycled Aggregates from a Sodium Silicate Process and the Influence of Graphene Oxide as a Nano-Addition

Strength prediction and mix design procedures for geopolymer and alkali-activated cement mortars comprising a wide range of environmentally responsible binder systems

Effect of Fine Aggregates on Properties of Magnesium Potassium Phosphate Cement Mortar

Durability self-compacting mortar under external chemical attacks based on composite binder

Effect of Paste Fluidity and Paste-to-Aggregate Ratio on the Strength and Permeability of Porous Mortar from Manufactured Sand

Applying Alkali Activator and Hydrophobic Agents in Clay-Based Mortars for Enhanced Properties

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Development of Alkaline-Activated Self-Leveling Hybrid Mortar Ash-Based Composites

Design of Inorganic Polymer Mortar from Ferricalsialic and Calsialic Slags for Indoor Humidity Control

Rheological Behavior and Strength Characteristics of Cement Paste and Mortar with Fly Ash and GGBS Admixtures

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

An Enhanced Mix-Design Method for Self-Compacting Concrete Based on Paste Rheological Threshold Theory and Equivalent Mortar Film Thickness Theories

Use of Mixture Design Approach for the Optimization and Performance of Cost-Effective Cementitious Quaternary System: Portland Cement–Fly Ash–Silica Fume–Phosphogypsum