Silica precipitation from rice husk ash leachate: optimization and kinetic analysis

DOI: https://doi.org/10.1007/s11696-024-03541-z
IF: 2.146
2024-06-05
Chemical Papers
Abstract:The production of silica from husk waste material addresses two problems: the accumulation of husk waste in the rice milling industry and demand for silica. This study successfully developed a complete process optimization and kinetics analysis for silica precipitation from Na 2 SiO 3 (rice husk ash leachate). The process of silica production from rice husk ash was conducted via alkaline leaching followed by acid precipitation. Silica precipitation was carried out in a flask equipped with a thermometer and a pH meter. Precipitation was carried out at a pH range of 5–9, a temperature range of 30–90 °C, and a precipitation duration of 0–120 min. 0.5 M H 2 SO 4 was added slowly using a dosing pump until the required operating conditions were achieved. The operating conditions were analyzed to determine the optimum temperature, pH, and precipitation duration. Kinetics analysis was also conducted to obtain a kinetic expression describing the precipitation process. A silica precipitation recovery of 73% was obtained under operating conditions of 90 °C and pH 5 for 90 min. The precipitation process can be described by the second-order kinetic equation. The kinetics equation that describes this process is . The obtained apparent activation energy is 26.62 kJ/mol.
chemistry, multidisciplinary
What problem does this paper attempt to address?