Abstract:Concrete is a multiphase composite material composed of mortar, aggregate, and interface transition zone (ITZ). The mesoscopic components of concrete have an important influence on its anti-penetration performance. In this study, a series of penetration experiments with large-caliber ogive-nosed projectiles penetrating concrete targets are carried out. The test results show that the damage to the concrete target consists of crater and tunnel zones and increases with increasing impact velocity. Then, a local background grid method is proposed to establish a 3D mesoscopic model of concrete, based on the arrangement characteristics of the sequence number of the finite elements. Compared with the traditional 3D mesoscopic concrete modeling method, the proposed method can effectively improve the modeling efficiency. Subsequently, numerical simulations are performed based on the 3D mesoscopic model, with the simulation and experimental results in good agreement, verifying the effectiveness of the model. Finally, the verified 3D mesoscopic model is employed to investigate the effects of shape, volume fraction, size interval, and strength of the concrete aggregates on the depth of penetration (DOP) and deflection of the projectile. The simulation results indicate that the shape of the aggregate has a negligible effect on both uniaxial compressive strength and DOP. Therefore, spherical aggregates are used to improve modeling efficiency. Increasing the volume fraction and strength of the aggregates can significantly enhance the anti-penetration performance of concrete. The influence of aggregate size interval on DOP is slight, but it has a significant impact on projectile and trajectory deflection at the same aggregate volume fraction. The uneven lateral resistance on both sides of the projectile, caused by the random distribution of aggregates, is a major factor in deflection.

Investigation on penetration resistance of foamed concrete

Energy-absorbing Properties and Crushing Flow Stress Equation of Lightweight Foamed Concrete

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

Experimental on the projectile penetration concrete targets and reinforced concrete targets

Experimental Study of Squeeze Behavior for a Kind of New Lightweight Foamed Concrete

Experimental and 3D Mesoscopic Numerical Simulation Study of Kinetic Projectile Penetrating into Concrete

Dynamic response of foam concrete under low-velocity impact: experiments and numerical simulation

Study on the Behavior of Projectile Shank Friction Penetrating into Concrete

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

Experimental and numerical investigation on the resistance of steel fiber-reinforced heavyweight concrete slabs against rigid projectile impact

High Velocity Long Rod Projectile's Penetration into Semi-Infinite Concrete Targets

Porosity, Gradient and Impact Velocity Effects on Compressive Response of Foamed Concrete

Performance of Cellular Concrete under Low-Velocity Impact and Penetration

Experimental and numerical study on projectiles' high-velocity penetration into reinforced concrete

Experimental and theoretical investigation of the failure behavior of a reinforced concrete target under high-energy penetration

On the Friction Effects on Rigid-Body Penetration in Concrete and Aluminium-Alloy Targets

High-velocity Penetration of Concrete Targets with Three Types of Projectiles: Experiments and Analysis

Projectile penetration of reinforced concrete considering the effect of steel reinforcement: Experimental study and theoretical analysis

Study on Penetration of Concrete Targets by Ogive-Nose Steel Projectile

Impact response of lightweight steel foam concrete composite slabs: Experimental, numerical and analytical studies

Experimental and theoretical study on steel long-rod projectile penetration into concrete targets with elevated impact velocities