Abstract:With the premise of investigating mechanical properties, the thermal conductivity of autoclaved aerated concrete (AAC) is a key index of self-insulation block walls for building energy conservation. This study focused on the effect of pore structures on the mechanical performance and thermal conductivity of AAC with the comparison of AAC base materials. Different kinds of AAC and their base materials were prepared and experimentally investigated. While maintaining a consistent mix proportion of the AAC base material, the pore structure of AAC was changed by the dosage of aluminum power/paste, foam stabilizer, and varying the stirring time of aluminum paste. The steam curing systems of AAC and the base material were determined based on SEM (Scanning Electronic Microscopy) and XRD (X-ray Diffraction) tests. With almost the same apparent density, the pore size decreased with the increasing content of foam stabilizer, and the mixing time of aluminum paste and foam stabilizer has a great influence on pore size. The thermal conductivity test and compressive test results indicated that that pore size had an effect on the thermal conductivity, but it had little effect on the compressive strength, and the thermal conductivity of sand aeration AAC was 8.3% higher than that of fly ash aeration AAC; the compressive strength was 10.4% higher, too. With almost the same apparent density, the regression mathematical model indicates that the thermal conductivity of AAC increased gradually with the increase of pore size, but it had little effect on the compressive strength. From the test results of basic mechanical properties, the mechanical model of cubic compressive strength, elastic modulus, axial compressive strength, and splitting tensile strength was obtained. The proposed stress–strain relationship model could well describe the relationship of AAC and the base material at the rising section of the curve.

Investigation of Low-Velocity Impact Behaviors of Foamed Concrete Material

Behavior Of Concrete Filled Tubes And Confined Concrete Filled Tubes Under High Speed Impact

The Effect of Pore Structure on Impact Behavior of Concrete Hollow Brick, Autoclaved Aerated Concrete and Foamed Concrete

An experimental investigation and fractal modeling on the effective thermal conductivity of novel autoclaved aerated concrete (AAC)-based composites with silica aerogels (SA)

Experimental Investigation and Numerical Analyses of Autoclaved Aerated Concrete Under Low-Velocity Drop Weight Impact

Field testing of blast responses and strengthening methods of reinforced autoclaved aerated concrete panels

Investigation on Anti-Explosion Performance of Reinforced Concrete Slab with Composite Protective Aluminum Foam

Performance of Cellular Concrete under Low-Velocity Impact and Penetration

Effect of Pore Structure on Thermal Conductivity and Mechanical Properties of Autoclaved Aerated Concrete

Experimental Study on Dynamic Response of CFRCM Confined Seawater Sea Sand RC Columns Subjected to Lateral Impact

Experimental Research on Dynamic Mechanical Properties of High-Density Foamed Concrete

On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

On low-velocity impact response of foam-core sandwich panels

Low-Velocity Impact Experiments and Modeling of TRC Skin-Aerated Concrete Core Sandwich Composites

Dynamic response and energy absorption of aluminum foam sandwich under low-velocity impact

Blast Responses of CFRP Strengthened Autoclaved Aerated Cellular Concrete Panels

Dynamic response of foam concrete under low-velocity impact: experiments and numerical simulation

Impact response of lightweight steel foam concrete composite slabs: Experimental, numerical and analytical studies

Experimental and Numerical Studies on the Behaviors of Autoclaved Aerated Concrete Panels with Insulation Boards Subjected to Wind Loading

Effect of the axial load on the dynamic response of the wrapped CFRP reinforced concrete column under the asymmetrical lateral impact load

The Effect of Low Velocity Impact Loading on Self-Compacting Concrete Reinforced with Carbon Fiber Reinforced Polymers