Abstract:Highlights • The effect of fiber types on engineered geopolymer composite (EGC) properties was studied. • PE fibers were recommended for the optimal performance of EGC. • A series of field blast tests were carried out. • The blast resistance of structural members strengthened by EGC were evaluated. The recent increase in blast/bombing incidents all over the world has pushed the development of effective strengthening approaches to enhance the blast resistance of existing civil infrastructures. Engineered geopolymer composite (EGC) is a promising material featured by eco-friendly, fast-setting and strain-hardening characteristics for emergent strengthening and construction. However, the fiber optimization for preparing EGC and its protective effect on structural elements under blast scenarios are uncertain. In this study, laboratory tests were firstly conducted to evaluate the effects of fiber types on the properties of EGC in terms of workability, dry shrinkage, and mechanical properties in compression, tension and flexure. The experimental results showed that EGC containing PE fiber exhibited suitable workability, acceptable dry shrinkage and superior mechanical properties compared with other types of fibers. After that, a series of field tests were carried out to evaluate the effectiveness of EGC retrofitting layer on the enhancement of blast performance of typical elements. The tests include autoclaved aerated concrete (AAC) masonry walls subjected to vented gas explosion, reinforced AAC panels subjected to TNT explosion and plain concrete slabs subjected to contact explosion. It was found that EGC could effectively enhance the blast resistance of structural elements in different scenarios. For AAC masonry walls and panels, with the existence of EGC, the integrity of specimens could be maintained, and their deflections and damage were significantly reduced. For plain concrete slabs, the EGC overlay could reduce the diameter and depth of the crater and spallation of specimens.

Field testing of blast responses and strengthening methods of reinforced autoclaved aerated concrete panels

Blast Responses of CFRP Strengthened Autoclaved Aerated Cellular Concrete Panels

Anti-explosion Tests and Numerical Simulations of Ultra-High Toughness Cementitious Composites Subjected to Blast by Embedded Explosives

Blast Responses of Bfrp-Bar Reinforced Aac Panels

Polyurea Coating for Foamed Concrete Panel:An Efficient Way to Resist Explosion

Study of Autoclaved Aerated Concrete Masonry Walls under Vented Gas Explosions

Numerical simulation of autoclaved aerated concrete masonry wall subjected to close-in explosion and the structural damage assessment

Performance of retrofitted autoclaved aerated concrete masonry walls subjected to gas explosions

Experimental and Numerical Study of Basalt Fiber Reinforced Polymer Strip Strengthened Autoclaved Aerated Concrete Masonry Walls under Vented Gas Explosions

Experimental and Analytical Study on CFRP Strengthened AAC Panels

Investigation of Low-Velocity Impact Behaviors of Foamed Concrete Material

On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

Experimental and Numerical Studies on the Behaviors of Autoclaved Aerated Concrete Panels with Insulation Boards Subjected to Wind Loading

Experimental investigation of engineered geopolymer composite for structural strengthening against blast loads

Experimental study on failure mechanisms of sandwich panels with multi-layered aluminum foam/UHMWPE laminate core under combined blast and fragments loading

Dynamic Behaviour of Concrete Sandwich Panel under Blast Loading

Dynamic Performance of Ultra-High Performance Fiber-Reinforced Concrete Panel Exposed to Explosive Loading

Experimental and Numerical Study on CFRP Strip Strengthened Clay Brick Masonry Walls Subjected to Vented Gas Explosions

Experimental study on the dynamic response of foam-filled corrugated core sandwich panels subjected to air blast loading

Experiment and Numerical Investigations of Ultra-High Toughness Cementitious Composite Slabs under Contact Explosions

Experimental Investigation and Numerical Analyses of Autoclaved Aerated Concrete Under Low-Velocity Drop Weight Impact