Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. This study presents an inclusive experimental and numerical investigation of the resistance of steel fiber-reinforced heavyweight concrete under the impact of a high-velocity rigid projectile. Thus, concrete specimens were made using hooked-end steel fibers at 0%, 0.5%, 1%, 1.5%, 2%, and 2.5% volume fractions to assess the physicomechanical specifications of heavyweight concrete containing iron ore as fine and coarse aggregates. Also, the compressive and splitting tensile strengths, modulus of elasticity, stress–strain relationship, bulk density, and water absorption capacity of heavyweight concrete specimens were compared to those of the equivalent normal-weight concrete. The penetration tests were conducted on concrete slabs fabricated with normal weight and heavyweight concrete mixes to examine the specimens' failure mode, penetration depth, and spalling volume. The results revealed that normal-weight concrete's compressive and splitting tensile strengths were more susceptible to adding steel fibers. It was also shown that increasing the density and fiber content significantly affected the impact resistance and residual velocity of fiber-reinforced concrete elements. Heavyweight concrete provided better life safety measures against the impact load than normal weight specimens, while the repair and reuse of heavyweight concrete components were feasible. Moreover, numerical modeling was performed using LS-DYNA finite element software, and the predictions were compared to the proposed experimental results and the analytical relations in the literature. There was good agreement between the results.

Experimental and numerical investigation on the resistance of steel fiber-reinforced heavyweight concrete slabs against rigid projectile impact

Compressive Impact Tests of Lightweight Concrete with 155-Mm-diameter Spilt Hopkinson Pressure Bar

Development of a Steel Fiber-Reinforced Rubber Concrete for Jacketing of Bridge Piers Against Vehicular Impacts: Preliminary Results

Behavior of prestressed fiber-reinforced steel-lined concrete slabs under projectile impact

Investigation of Impact Resistance of High-Strength Portland Cement Concrete Containing Steel Fibers

Optimization of a structural lightweight fiber-reinforced concrete for best performance under impact loading

Experimental Study of Long-rod Projectile Penetration into Steel Fiber Reinforced Concrete

Numerical analysis of projectile penetration and perforation of plain and fiber reinforced concrete slabs

Impact resistance of concrete and fibre-reinforced concrete: a review

Experimental investigation of single and hybrid-fiber reinforced concrete under drop weight test

Experimental and numerical investigations of low velocity impact behavior of high-performance fiber-reinforced cement based composite

Impact Resistance of Sustainable Reactive Powder Concrete and Reinforced Concrete Slabs

Impact response of lightweight steel foam concrete composite slabs: Experimental, numerical and analytical studies

Study on Shear Performance of Corroded Steel Fiber Reinforced Concrete Beams under Impact Load

The Effect of Concrete Containing Recycled Concrete Aggregate and Crushed Clay Bricks on Slab under Dynamic Loading

Experimental Study on Hybrid Effect Evaluation of Fiber Reinforced Concrete Subjected to Drop Weight Impacts.

Blast resistance of concrete slab reinforced with high performance fibre material

Investigation on penetration resistance of foamed concrete

Failure Mechanism of Reinforced Concrete Subjected to Projectile Impact Loading

Mechanical and fractural characteristics of structural lightweight fiber reinforced concrete

Experimental Study on Dynamic and Static Mechanical Properties of Steel Fiber Reinforced Concrete