Abstract:Especially in the electric vehicle industry where both high energy density and long lifetime batteries are sought, Ni-based cathode materials such as LiNi 1−x−y Mn x Co y O 2 (NMC) and LiNi 1−x−y Co x Al y O 2 (NCA) provide a fitting compromise in capacity and cyclability. In recent years, the high cost of cobalt in addition to the problematic geopolitics surrounding cobalt mining have motivated research efforts toward cobalt-free cathode materials. 1 However, Ni-rich materials are subject to inevitable failure mechanisms such as microcracking and parasitic reactions with the electrolyte which are further aggravated with an increase in Ni-content and in the absence of Co. 2 Many strategies have been proposed to overcome these challenges such as doping and/or coating the cathode particles, 3 but there remains a need to further increase energy density with minimal compromise to lifetime. In this work we present a cathode active material system designed to push Ni-rich and Co-free materials to the limit of their performance. This is done by choosing optimal polycrystalline particle size, a balance of Mn and Al content, and a sufficient amount of high-valence doping. Additionally, appropriate synthesis conditions are needed to obtain the desired morphology and infuse the intergranular boundaries with the W dopant. It is then important to choose an appropriate upper cutoff voltage during cycling to maximize energy while avoiding drastic crystal changes. 4 This optimized NMA-W material system delivers specific capacity above 200 mAh/g while retaining 95% of its capacity without relying on any amount of Co. The series of NMA-W materials presented in this work were characterized and tested. Scanning electron microscopy (SEM) images were used to observe morphology and crystallite growth after synthesis. X-ray diffraction (XRD) analysis was conducted to monitor the crystal parameters and accelerated rate calorimetry (ARC) was used to assess the thermal stability and safety of the material. Compression tests were also conducted to study the strength of the particles and their propensity to crack under stress. Choi, J. U., Voronina, N., Sun, Y. K. & Myung, S. T. Recent Progress and Perspective of Advanced High-Energy Co-Less Ni-Rich Cathodes for Li-Ion Batteries: Yesterday, Today, and Tomorrow. Adv. Energy Mater. 10 , 1–31 (2020). Li, H. et al. An Unavoidable Challenge for Ni-Rich Positive Electrode Materials for Lithium-Ion Batteries. (2019) doi:10.1021/acs.chemmater.9b02372. Yan, W., Yang, S., Huang, Y., Yang, Y. & Guohui Yuan. A review on doping/coating of nickel-rich cathode materials for lithium-ion batteries. J. Alloys Compd. 819 , 153048 (2020). Nam, G. W. et al. Capacity Fading of Ni-Rich NCA Cathodes: Effect of Microcracking Extent. ACS Energy Lett. 4 , 2995–3001 (2019).

Review—Advancements in Synthesis Methods for Nickel-Rich NCA Cathode Materials: Optimizing Synthesis Conditions and Their Impact on Electrochemical Performances for Next-Generation Lithium-Ion Batteries

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

NCA cathode material: synthesis methods and performance enhancement efforts

Ni-RICH lithium nickel manganese cobalt oxide cathode materials: A review on the synthesis methods and their electrochemical performances

(Invited) Delineating the Intricacies Involved in the Synthesis of Cobalt-Free High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Advancements and Challenges in High-Capacity Ni-Rich Cathode Materials for Lithium-Ion Batteries

High Nickel and No Cobalt─The Pursuit of Next-Generation Layered Oxide Cathodes.

Optimization of LiNiCoMnO2 Cathode Material Synthesis Using Polyvinyl Alcohol Solution Method for Improved Lithium-Ion Batteries

Low-cobalt active cathode materials for high-performance lithium-ion battery: Synthesis and performance enhancement methods

A review of nickel-rich layered oxide cathodes: synthetic strategies, structural characteristics, failure mechanism, improvement approaches and prospects

Nickel-rich nickel–cobalt–manganese and nickel–cobalt–aluminum cathodes in lithium-ion batteries: Pathways for performance optimization

In situ synthesis of a nickel concentration gradient structure of Ni-rich LiNi0.8Co0.15Al0.05O2 with promising superior electrochemical properties at high cut-off voltage

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage

Insight of Synthesis of Single Crystal Ni‐Rich LiNi1−x−yCoxMnyO2 Cathodes

Comprehensive review of single-crystal Ni-rich cathodes: single-crystal synthesis and performance enhancement strategies

Research Progress on Enhancing the Performance of High Nickel Single Crystal Cathode Materials for Lithium-Ion Batteries

Pushing the Energy-Lifetime Frontier of Li-Ion Batteries with Optimized Ni-Rich, Co-Free NMA-W Cathodes

Synergistic Effect of B-Nb Co-modified to Achieve Crystal Structure and Interface Tuning for Ni-rich Cathode

Rich-Nickel Ternary Layered Oxide LiNi0.8Co0.1Mn0.1O2 Cathode Material

Research Progress in Modification of Nickel-Rich Ternary Cathode Material LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

A review on nickel-rich nickel-cobalt-manganese ternary cathode materials LiNi0.6Co0.2Mn0.2O2 for lithium-ion batteries: performance enhancement by modification.