Abstract:Layered nickel-rich cathodes generally suffer from their unstable surface because of lithium impurities. Thus, building an interface with both high electrochemical stability and electroactivity is essential for the development of cathodes. In this work, a Li0.73Co1–xAlxO2 thin layer was successfully coated on pristine LiNi0.8Co0.15Al0.05O2 (NCA) spheres by the reaction of the surface residual lithium with cobalt oxalate nanomaterials. Then, the surface chemical states of NCA were effectively modulated by Li0.73Co1–xAlxO2 coating, including less surface lithium impurities, lower resistance, enhanced ion conductivity, and cycling stability. As a potential cathode material with a higher oxidation potential than that of NCA, Li0.73Co1–xAlxO2 coating plays both roles of an isolation layer and active layer. The advances of Li0.73Co1–xAlxO2 coating may be related to the enhanced covalence property of the Co–O bond and the coexistence of Co4+ and Al3+, which can help to form a stable cathode–electrolyte interface and boost the ion diffusion of the coated NCA cathode. This Li0.73Co1–xAlxO2-modified NCA cathode exhibits a highly competitive performance, such as a capacity of 215.2 mA h g–1 at the initial cycle (0.1 C) and a retention rate of 62.7% after 200 cycles at 5 C. This surface chemical state modulation strategy provides a new possibility of surface engineering with nickel-rich cathodes for high-energy Li-ion batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c05229?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c05229</a>.XRD pattern and SEM image of the precursor; Raman spectra of NCA, , and ; HRTEM of pristine NCA; XRD patterns and structure parameters of 1.0 wt % Li0.73Co1–xAlxO2-coated NCA (annealing temperature at 500, 600, and 700 °C); cycling performances of pristine and all experimental samples; full battery cycling test of NCA, , and ; discharge curves of NCA, , and ; XRD patterns of NCA, , and after 200 cycles; experimental design of this work; and calculated relative area of the XPS peaks of NCA, , and (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c05229/suppl_file/sc0c05229_si_001.pdf">PDF</a>).This article has not yet been cited by other publications.

NCA cathode material: synthesis methods and performance enhancement efforts

Review—Advancements in Synthesis Methods for Nickel-Rich NCA Cathode Materials: Optimizing Synthesis Conditions and Their Impact on Electrochemical Performances for Next-Generation Lithium-Ion Batteries

One-Pot Combustion Synthesis of Lithium Nickel Cobalt Aluminium Oxide Cathode Material for Lithium-Ion Battery

Fast Production of High Performance LiNi0.815Co0.15Al0.035O2 Cathode Material via Urea-Assisted Flame Spray Pyrolysis

High-rate LiNi0.815Co0.15Al0.035O2 cathode material prepared by spray drying method for Li-ion batteries

Insights on the Activation and Stabilization of NCA Cathode Interface: Surface Chemical State Modulations of Aluminum-Mediated Li 0.73 CoO 2 Coatings

Boosting Cell Performance of LiNi 0.8 Co 0.15 Al 0.05 O 2 via Surface Structure Design.

In Situsynthesis Of A Nickel Concentration Gradient Structure Of Ni-Rich Lini(0.8)Co(0.15)Al(0.05)O(2)With Promising Superior Electrochemical Properties At High Cut-Off Voltage

Improved high-voltage performance of LiNi0.87Co0.1Al0.03O2 by Li+-conductor coating

Enhancing Surface and Crystal Stability of the Ni-High NCA Cathode for High-Energy and Durable Lithium-Ion Batteries

In situ synthesis of a nickel concentration gradient structure of Ni-rich LiNi0.8Co0.15Al0.05O2 with promising superior electrochemical properties at high cut-off voltage

Rational Design of a High-Energy LiNi0.8Co0.15Al0.05O2 Cathode for Li-ion Batteries

(Invited) Delineating the Intricacies Involved in the Synthesis of Cobalt-Free High-Nickel Layered Oxide Cathodes for Lithium-Ion Batteries

Highly Enhanced Electrochemical Performances of LiNi0.815Co0.15Al0.035O2 by Coating Via Conductively LiTiO2 for Lithium-Ion Batteries

Conversion of residual lithium into fast lithium ion conductor coating to achieve high cycle life LiNi0.8Co0.15Al0.05O2 cathode for lithium ion battery

Using in situ and operando methods to characterize phase changes in charged lithium nickel cobalt aluminum oxide cathode materials

Synthesis of Single Crystal LiNi0.92Co0.06Mn0.01Al0.01O2 Cathode Materials with Superior Electrochemical Performance for Lithium Ion Batteries

Synthesis of Single Crystal LiNi 0.92 Co 0.06 Mn 0.01 Al 0.01 O 2 Cathode Materials with Superior Electrochemical Performance for Lithium Ion Batteries

The cycle performance of high nickel cathode materials significantly enhanced by the LiAlO2@Al2O3 dual-modified coating

Synthesis and characterization of Co-free NMA cathodes for Fast Charging Lithium-ion Batteries

Ni-RICH lithium nickel manganese cobalt oxide cathode materials: A review on the synthesis methods and their electrochemical performances