Abstract:To reduce cost while maintaining the specific capacity of LiNi0.5Co0.2Mn0.3O2 (NCM523) cathode, we systematically explore the effect of Ni substitution for Co on the structure, electrochemical performance, and thermal stability of NCM523, LiNi0.55Co0.15Mn0.3O2 (NCM5.5:1.5:3), and LiNi0.6Co0.1Mn0.3O2 (NCM613) cathodes in this study. These materials were investigated by scanning electron microscopy, particle-size analysis, Rietveld refinement of X-ray diffraction, inductively coupled plasma-atomic emission spectroscopy, X-ray photoelectron spectroscopy, charge-discharge testing, electrochemical impedance spectroscopy, the galvanostatic intermittent titration technique, and differential scanning calorimetry. The results indicate that a decrease in the Co content of NCM523 lead to an increase in the voltage platform and discharge capacity, which contributes to the improvement of the energy density. However, the initial efficiency, cycle performance, rate capability, and low-temperature performance was found to slightly decrease. This behavior can be attributed to the lower Co content yielding higher degrees of Li+/Ni2+ disordering, higher resistance, lower Li+ diffusivity, and higher activation energy (Ea). Moreover, as the Co content decreased, the thermal stability of NCM523 was slightly decreased. Considering both cost and performance, NCM5.5:1.5:3 and NCM613 materials deserve to be considered as the preferred next-generation materials.

A review on nickel-rich nickel-cobalt-manganese ternary cathode materials LiNi0.6Co0.2Mn0.2O2 for lithium-ion batteries: performance enhancement by modification.

Research Progress in Modification of Nickel-Rich Ternary Cathode Material LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Research Progress of Nickel-Rich Ternary Cathode in Lithium Battery

Rich-Nickel Ternary Layered Oxide LiNi0.8Co0.1Mn0.1O2 Cathode Material

Structure, modification, and commercialization of high nickel ternary material (LiNi0.8Co0.1Mn0.1O2 and LiNi0.8Co0.15Al0.05O2) for lithium ion batteries

Research Status of Ni-rich Ternary Cathode Materials for Lithium Ion Batteries

Research Progress on the Failure Mechanisms and Modifications of Ni-Rich Ternary Layered Oxide Cathode Materials for Lithium-Ion Batteries

Research Progress on the Surface of High-Nickel Nickel–Cobalt–Manganese Ternary Cathode Materials: A Mini Review

Fabrication of high electrochemical performance ternary lithium battery using LiNi0.8Co0.1Mn0.1O2 with nano-TiO2 coating

Research Progress in Ternary Cathode Materials Li(Ni,Co,Mn)O 2 for Lithium Ion Batteries

Doping Effects on Ternary Cathode Materials for Lithium‐ion Batteries:A Review

Design of a new Li-rich Mn-based ternary cathode material based on Ni, Co, and Mn action mechanism

Structures, issues, and optimization strategies of Ni-rich and Co-low cathode materials for lithium-ion battery

Ni‐rich cathode materials for high‐perform ance Li‐ion batteries: challenges, progress and perspectives

Degradation mechanisms and modification strategies of nickel-rich NCM cathode in lithium-ion batteries

Research Progress on Enhancing the Performance of High Nickel Single Crystal Cathode Materials for Lithium-Ion Batteries

A Ternary MOF Derived Single Crystalline LiNi1/3Mn1/3Co1/3O2 As High-Voltage Cathodes for Lithium-Ion Batteries

Substantial Doping Engineering in Layered LiNi 0.5+x Co 0.2−x Mn 0.3 O 2 Materials for Lithium-Ion Batteries

The correlation between structure and thermal properties of nickel-rich ternary cathode materials: a review

Review on Oxygen Release Mechanism and Modification Strategy of Nickel-Rich NCM Cathode Materials for Lithium-Ion Batteries: Recent Advances and Future Directions

Advancements and Challenges in High-Capacity Ni-Rich Cathode Materials for Lithium-Ion Batteries