Abstract:Here we report the UV detection properties of vertically well aligned zinc oxide (ZnO) nanowires (NWs) coated with titanium dioxide-graphene oxide (TiO 2 -GO) nanocomposites which are fabricated by easy, cost-effective simple chemical methods comprised of sol-gel spin coating and chemical bath deposition. The films are deposited on fluorine-doped tin oxide (FTO) coated glass substrates with varied GO content of 0 %, 5 %, 10 % and 15 %. The formation of Schottky junction is evident from the non-linear current-voltage characteristics of FTO/ZnO NWs-GO/Ag configuration. Both the ideality factor (η) and the potential barrier height of the junction decreases with increased GO content in the film. Under UV irradiation (λ∼365 nm, power 8.0 μW), the ideality factor reduces from 9.40 to 8.71 and the potential barrier height decreases from 0.54 eV to 0.49 eV when 15 % GO is incorporated in ZnO NWs-TiO 2 films. The built-in electric field in the ZnO NWs/TiO 2 -GO nanocomposites facilitates the separation of electron-hole pairs, resulting in a significant improvement of photocurrent and high photo-responsivity of up to 13.52 A/W at low bias (0.5 V) with rapid response time (0.89 s) and fast recovery time (1.66 s). When varying concentrations of GO are added to ZnO NWs/TiO 2 nanocomposites, significant improvements in responsivity, as well as quick response and recovery time, are observed. Impedance spectra are measured under dark and UV light to investigate the role of GO in modulating the electrical properties of the ZnO NWs/TiO 2 -GO, a suitable hybrid nanostructure for optoelectronic application.

Improved responsivity and detectivity photodetector based on ZnO-rGO nanocomposite nanostructures

Non-aligned ZnO Nanowires Composited with Reduced Graphene Oxide and Single-Walled Carbon Nanotubes for Highly Responsive UV–visible Photodetectors

Enhanced performance of ZnO nanorod array/CuSCN ultraviolet photodetectors with functionalized graphene layers

Photogating-controlled ZnO Photodetector Response for Visible to Near-Infrared Light.

ZnO Quantum Dot-Doped Graphene/h-Bn/gan-heterostructure Ultraviolet Photodetector with Extremely High Responsivity.

Ultraviolet Photodetector Based on Nanostructured ZnO-reduced Graphene Oxide Composite

Broadband photoresponse promoted by interfacial electron transfer in diketopyrrolopyrrole-based compound/ZnO hybrid nanocomposites

Enhanced Sensitivity and Response Speed of Graphene Oxide/zno Nanorods Photodetector Fabricated by Introducing Graphene Oxide in Seed Layer

Improving the Performance of V2O5/rGO Hybrid Nanocomposites for Photodetector Applications

Schottky enabled enhanced UV photo-detection based on vertically aligned ZnO nanowire coated with TiO 2 -GO nanocomposites

Enhancement of photocurrent and responsivity of Zn1-xMgxO (x=15%)-based ultraviolet detector by UV-ozone treatment

Enhanced photoelectrochemical property of ZnO nanorods array synthesized on reduced graphene oxide for self-powered biosensing application

A high responsivity UV photodetectors based on ZnO quantum dots/ZnO nanowires homojunction

High Performance Charge-Transfer Induced Homojunction Photodetector Based on Ultrathin ZnO Nanosheet

Au-decorated 2D graphitic carbon nitride (g-C3N4)-coated ZnO nanorods for improved UV photodetection application

Realization of a high-Responsivity ultraviolet sensor base on ZnO nanowires modified by Au nanoparticles

ZnO Film UV Photodetector with Enhanced Performance: Heterojunction with CdMoO4 Microplates and the Hot Electron Injection Effect of Au Nanoparticles

Improved UV Photoresponse Performance of ZnO Nanowire Array Photodetector via Effective Pt Nanoparticle Coupling

UV-photodetector Based on Heterostructured ZnO/(Ga,Ag)-co-doped ZnO Nanorods by Cost-Effective Two-Step Process

Development of 2D based ZnO–MoS2 nanocomposite for photodetector with light-induced current study

Enhancing ZnO/Si heterojunction photodetector performance for ultra high responsivity across wide spectral range