Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

Oxide doping improving interface performance for Li7P3S11 solid electrolytes

An In-Situ Synergistic Enhancement Strategy from G-C3n4 and PDOL Composite Solid Electrolyte on the Interface Stability of Solid-State Lithium Battery

Argyrodite Solid Electrolyte with a Stable Interface and Superior Dendrite Suppression Capability Realized by ZnO Co-Doping

A Dynamically Stable Sulfide Electrolyte Architecture for High-Performance All-Solid-State Lithium Metal Batteries

Binary anion and cation co-doping enhance sulfide solid electrolyte performance for all-solid-state lithium batteries

Enhancing Ionic Conductivity and Electrochemical Stability of Li3PS4 Via Zn, F Co-Doping for All-Solid-State Li-S Batteries

Lithium Dendrite Suppression and Enhanced Interfacial Compatibility Enabled by an Ex Situ SEI on Li Anode for LAGP-Based All-Solid-State Batteries

Integrating high ionic conductive PDOL solid/gel composite electrolyte for enhancement of interface combination and lithium dentrite inhibition of solid-state lithium battery

Enhancing Ionic Conductivity and Electrochemical Stability of Li 3 PS 4 via Zn, F Co-Doping for All-Solid-State Li-S Batteries

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

Ameliorating the interfacial issues of all-solid-state lithium metal batteries by constructing polymer/inorganic composite electrolyte

Eliminating Li Dendrites in PEO-Based Polymer Solid Electrolytes by Doping with SbF<sub>3</sub>

Interface Design Enabling Stable Polymer/Thiophosphate Electrolyte Separators for Dendrite-Free Lithium Metal Batteries.

Dual-doping for enhancing chemical stability of functional anionic units in sulfide for high-performance all-solid-state lithium batteries

Constructing an Inorganic-Rich Solid Electrolyte Interphase by Adjusting Electrolyte Additives for Stable Li Metal Anodes

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

In Situ Polymerization Inhibiting Electron Localization in Hybrid Electrolyte for Room‐Temperature Solid‐State Lithium Metal Batteries

ZnO Substitution in Argyrodite Li5.5+3xZnxP1‐xOxS4.5‐xBr1.5 Electrolyte with Enhanced Interface Performance for All‐Solid‐State Battery

Insight on air-induced degradation mechanism of Li7P3S11 to design a chemical-stable solid electrolyte with high Li2S utilization in all-solid-state Li/S batteries

Promoting favorable interfacial properties in lithium-based batteries using chlorine-rich sulfide inorganic solid-state electrolytes

Doping effects of metal cation on sulfide solid electrolyte/lithium metal interface