Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Highly Purified Carbon Derived from Deashed Anthracite for Sodium-Ion Storage with Enhanced Capacity and Rate Performance

Microcrystalline Engineering of Anthracite‐Based Carbon Via Salt‐Assisted Ball Milling for Enhanced Sodium Storage Performance

Constructing Abundant Oxygen-Containing Functional Groups in Hard Carbon Derived from Anthracite for High-Performance Sodium-Ion Batteries

Altering Thermal Transformation Pathway to Create Closed Pores in Coal‐Derived Hard Carbon and Boosting of Na+ Plateau Storage for High‐Performance Sodium‐Ion Battery and Sodium‐Ion Capacitor

Advanced Structural Engineering Design for Tailored Microporous Structure via Adjustable Graphite Sheet Angle to Enhance Sodium‐Ion Storage in Anthracite‐Based Carbon Anode

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Rapid Carbonization of Anthracite Coal via Flash Joule Heating for Sodium Ion Storage

Anthracite-based expanded graphite as anode materials for sodium-ion batteries with exceptional sodium storage performances

Commercial Activated Carbon As a Novel Precursor of the Amorphous Carbon for High-Performance Sodium-Ion Batteries Anode

Demineralization activating highly-disordered lignite-derived hard carbon for fast sodium storage

Heteroatom screening and microcrystal regulation of coal-derived hard carbon promises high-performance sodium-ion batteries

High-yield Microstructure-Controlled Amorphous Carbon Anode Materials Through a Pre-Oxidation Strategy for Sodium Ion Batteries

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Adding CNTs into Anthracite towards High Performance Anode Materials for Lithium Ion Batteries

Engineering Ultramicroporous Carbon with Abundant C═O as Extended “Slope-Dominated” Sodium Ion Battery Anodes

Porous Doped Carbons from Anthracite for High-Performance Supercapacitors

An Anode Material for Lithium Storage: Si@N,S-Doped Carbon Synthesized via In Situ Self-Polymerization

Microcrystalline Hybridization Enhanced Coal‐Based Carbon Anode for Advanced Sodium‐Ion Batteries

From Micropores to Ultra-micropores inside Hard Carbon: Toward Enhanced Capacity in Room-/Low-Temperature Sodium-Ion Storage