Abstract:The specific power or rate capability of lithium-ion batteries (LIBs) today is insufficient for electric vehicles requiring fast charging and high power output. Compared with great progresses in the high-rate cathodes of LIBs, the development of matchable high-rate anodes still becomes a huge challenge. Carbonaceous materials have been widely used as the anodes of commercial LIBs due to the good conductivity, low cost and environmental friendliness. The "nanostructured carbon materials could achieve the high surface area for electrolyte penetration and the short solid-state ion diffusion length for rapid ion transport. Moreover, carbon nanomaterials avoid the large volume change during lithiation/delithiation, which is grave problem for the other high capacity anode materials including Si-based materials and metal oxides. In addition, heteroatom-doping can provide further space for the optimization of lithium storage performance. Herein, we reported the nitrogen-doped carbon nanocages (NCNC) as high-performance anode materials for lithium ion batteries, prepared by an in-situ generated magnesium oxide template method (from decomposition of basic magnesium carbonate) and pyridine as carbon source at growth temperatures of 700, 800, and 900 degrees C. The morphology, structure, and electrochemical performances were investigated by transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), nitrogen adsorption/desorption equipment, and constant current discharge/charge tests. For example, NCNC800, prepared at 800 degrees C, has a high specific surface area (1197 m(2).g(-1)), high nitrogen content (8.2 at%), good conductivity (46 S.m(-1)) and mesopores structure. As an anode material for LIBs, NCNC800 delivers a steady charge capacity of ca. 900 mAh.g(-1) at a low current density of 0.1 A.g(-1) after 20 cycles activation, and stabilizes at ca. 135 mAh.g(-1) even over 500 cycles at a high rate of 20.0 A.g(-1), which are superior to graphene and graphite. These good electrochemical performances, such as high steady charge capacity, high-rate capability and excellent cyclability, can be ascribed to the unique structure of NCNC, which is beneficial to the electrolyte penetration, Li-ion diffusion, electron conduction, and structural stability during lithium ions intercalation/deintercalation. This unique carbon nanomaterial provides a new alternative of anode materials for high-performance LIBs.

Adding CNTs into Anthracite towards High Performance Anode Materials for Lithium Ion Batteries

Study on Carbon Nanoparticles for Anode Materials of Lithium-Ion Battery

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Cobalt-promoted Fabrication of 3D Carbon with a Nanotube-Sheet Mutual Support Structure: Scalable Preparation of a High-Performance Anode Material for Li-ion Batteries

Tailoring the Li+ Intercalation Energy of Carbon Nanocage Anodes Via Atomic Al‐Doping for High‐Performance Lithium‐Ion Batteries

CNT@TiO2 Nanohybrids for High-Performance Anode of Lithium-Ion Batteries.

An integrated highly stable anode enabled by carbon nanotube-reinforced all-carbon binder for enhanced performance in lithium-ion battery

Preparation and lithium storage of anthracite-based graphite anode materials

Nitrogen-Doped Carbon Nanocages As High-Rate Anode for Lithium Ion Batteries

Carbon Nanotube Array Anodes for High-Rate Li-ion Batteries

Smart Construction of Integrated CNTs/Li4Ti5O12 Core/Shell Arrays with Superior High‐Rate Performance for Application in Lithium‐Ion Batteries

Smart Construction of Integrated CNTs/Li4Ti5O12 Core/Shell Arrays with Superior High-Rate Performance for Application in Lithium-Ion Batteries.

CNTs in Situ Attached to Α-Fe2o3 Submicron Spheres for Enhancing Lithium Storage Capacity

Metal Catalyst to Construct Carbon Nanotubes Networks on Metal Oxide Microparticles towards Designing High‐Performance Electrode for High‐Voltage Lithium‐Ion Batteries

Anatase-TiO 2 /CNTs nanocomposite as a superior high-rate anode material for lithium-ion batteries

Nitrogen and boron doped carbon layer coated multiwall carbon nanotubes as high performance anode materials for lithium ion batteries

Filled Carbon Nanotubes as Anode Materials for Lithium-Ion Batteries

Hollow core-shell structured CNT/PAN@Co9S8@C coaxial nanocables as high-performance anode material for lithium ion batteries

Advanced Structural Engineering Design for Tailored Microporous Structure via Adjustable Graphite Sheet Angle to Enhance Sodium‐Ion Storage in Anthracite‐Based Carbon Anode

Increasing the Pressure‐Free Stripping Capacity of the Lithium Metal Anode in Solid‐State‐Batteries by Carbon Nanotubes

Carbon Nanocages@ultrathin Carbon Nanosheets: One-step Facile Synthesis and Application As Anode Material for Lithium-Ion Batteries

Adding CNTs into Anthracite towards High Performance Anode Mate­rials for Lithium Ion Batteries