Abstract:As a secondary Li-ion battery with high energy density, lithium–sulfur (Li–S) batteries possess high potential development prospects. One of the important ingredients to improve the safety and energy density in Li–S batteries is the solid-state electrolyte. However, the poor ionic conductivity largely limits its application for the commercial market. At present, the gel electrolyte prepared by combining the electrolyte or ionic liquid with the all-solid electrolyte is an effective method to solve the low ion conductivity of the solid electrolyte. We present a cross-linked gel polymer electrolyte with fluoroethylene carbonate (FEC) as a solid electrolyte interface (SEI) film formed for Li–S quasi-solid-state batteries, which can be simply synthesized without initiators. This gel polymer electrolyte with FEC as an additive () possesses high ionic conductivity (0.830 × 10–3 S/cm at 25 °C and 1.577 × 10–3 S/cm at 85 °C) and extremely high Li-ion transference number (tLi+ = 0.674). In addition, the strong ability toward anchoring polysulfides resulting in the high electrochemical performance of Li–S batteries was confirmed in by the diffusion experiment, X-ray photoelectron spectroscopy analysis (XPS), and scanning electron microscopy (SEM) mapping of the S element. Such a high ion conductivity (IC) gel polymer electrolyte enables a competitive specific capacity of 940 mAh/g at 0.2C and supreme cycling performance for 180 cycles at 0.5C, which is far beyond that of conventional poly(ethylene oxide)-based quasi-solid-state Li–S batteries.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c16148.Diagrammatic sketch of preparation of precursors; thickness of the PE separator; H NMR spectra of PEGDE, PEI, and Li–S GPE; XPS spectra of different elements in the PE separator; SEM mapping of the S element on the GPE membrane and the PE separator; and thermal properties of GPE membrane (PDF)This article has not yet been cited by other publications.

Molecule-Level Multiscale Design of Nonflammable Gel Polymer Electrolyte to Build Stable SEI/CEI for Lithium Metal Battery

Molecular engineering of a gel polymer electrolyte via in-situ polymerization for high performance lithium metal batteries

Excellent Polymerized Ionic-Liquid-Based Gel Polymer Electrolytes Enabled by Molecular Structure Design and Anion-Derived Interfacial Layer

In Situ Formed Gel Polymer Electrolytes Enable Stable Solid Electrolyte Interface for High-Performance Lithium Metal Batteries

Stable Li–Metal Batteries Enabled by in Situ Gelation of an Electrolyte and In-Built Fluorinated Solid Electrolyte Interface

Optimizing Li‐ion Solvation in Gel Polymer Electrolytes to Stabilize Li‐Metal Anode

A two-step strategy for constructing stable gel polymer electrolyte interfaces for long-life cycle lithium metal batteries

Regulating solvation structure in gel polymer electrolytes with covalent organic frameworks for lithium metal batteries

In situ initiator-free gelation of highly concentrated lithium bis(fluorosulfonyl)imide-1,3-dioxolane solid polymer electrolyte for high performance lithium-metal batteries

Polymer–inorganic solid–electrolyte interphase for stable lithium metal batteries under lean electrolyte conditions

In situ synthesis of gel polymer electrolyte for lithium-metal anodes with a sulfide-enhanced interface via thiol–ene click chemistry

Facile In Situ Chemical Cross-Linking Gel Polymer Electrolyte, which Confines the Shuttle Effect with High Ionic Conductivity and Li-Ion Transference Number for Quasi-Solid-State Lithium–Sulfur Battery

Immobilizing Ceramic Electrolyte Particles into a Gel Matrix Formed In Situ for Stable Li-Metal Batteries

In situ formation of polymer-inorganic solid-electrolyte interphase for stable polymeric solid-state lithium-metal batteries

Flame Retardant and Stable Li1.5Al0.5Ge1.5(PO4)3-Supported Ionic Liquid Gel Polymer Electrolytes for High Safety Rechargeable Solid-State Lithium Metal Batteries

Supramolecular Network Structured Gel Polymer Electrolyte with High Ionic Conductivity for Lithium Metal Batteries

Gel Polymer Electrolyte Enables Low-Temperature and High-Rate Lithium-Ion Batteries via Bionic Interface Design

Interface Design Enabling Stable Polymer/Thiophosphate Electrolyte Separators for Dendrite-Free Lithium Metal Batteries.

Crosslinked Gel Polymer Electrolyte from Trimethylolpropane Triglycidyl Ether by In Situ Polymerization for Lithium-Ion Batteries

Gel electrolyte with flame retardant polymer stabilizing lithium metal towards lithium-sulfur battery

Salt Dissociation and Localized High-concentration Solvation by Interface of Fluorinated Gel and Polymer Solid Electrolyte