Abstract:Water electrolyzers, such as proton exchange membrane water electrolyzers (PEM) and anion exchange membrane water electrolyzers (AEM) are important technologies for sustainable electrochemical energy conversion. The oxygen evolution reaction (OER) at the anode is a pivotal half-reaction in these systems. Despite substantial progress over the years, OER kinetics remain a major source of inefficiency in these devices, necessitating the development of stable catalysts. Currently, precious metal-based catalysts dominate the landscape of OER catalysts for these devices. As non-precious alternatives, nickel-iron (Ni/Fe) catalysts have emerged as particularly promising in alkaline conditions. However, they exhibit dynamic behavior during electrocatalysis—for instance, oxidizing to an active oxyhydroxide phase during the OER. This dynamic nature makes it challenging to establish clear structure-activity-stability relationships. Incorporating cobalt (Co) into the catalyst composition has been found to influence the activity and material conversion of mixed Ni-Fe-Co oxides and (oxy)hydroxides. Methods for rationally activating and stabilizing Ni-Fe-based catalysts via electrochemical and chemical (e.g. composition) routes are necessary for enhancing scalability and accessibility in hydrogen production devices. Herein, our goal is to understand and exploit activation protocols to enhance the OER performance of as-synthesized nickel-iron-cobalt metal thin films, addressing three primary objectives: synthesizing and characterizing homogeneous metal catalysts, investigating the impact of different potential ranges and scan rates on catalyst oxidation and surface conversion from the metal, and assessing how the addition of cobalt influences conversion rates and current density of the catalyst. We use cyclic voltammetry to facilitate and disentangle conversion (integrated reductive peak for Ni and/or Co 2+ → 3+ transition) and OER performance (current density (mA cm -2 ) at η = 350 mV). For all compositions tested of (Ni 80 Fe 20 ) 100-x Co x , x = 0 - 5 % we observe that the most effective conversion requires both redox and oxygen evolution. To further investigate the relationship between conversion and performance catalysts were tested in varying electrolytes such as 1M KOH, 0.1M KOH, and an ionomer overlayer to understand how these impacted conversion. Subsequently, post-analysis techniques such as X-ray photoelectron spectroscopy (XPS) and inductively coupled plasma mass spectrometry optical emission spectroscopy (ICP-OES) were conducted to gain insights into the surface composition and elemental distribution of the catalysts following potential cycling. Additionally, electrochemical mass spectrometry (EC-MS) was employed to quantify the faradaic efficiency of oxygen, providing an understanding of at what point the catalyst begins converting and how much of the OER current is directed towards OER versus metal conversion. This project advances the fundamental understanding of NiFeCo catalyst conversion, shedding light on the critical role of catalyst composition and investigating the conditions that foster optimal conversion efficiency. The use of physical vapor deposition for thin film catalysts offers distinct advantages, making deposition and scaling processes facile. This capability, coupled with the gained insights into conversion dynamics, sets the stage for in situ optimization of the surface to achieve the active oxyhydroxide phase with the highest performance for AEM water electrolysis.

Water-Soluble Nickel and Iron Salts for Hydroxymethylfurfural (HMF) and Water Oxidation: The simplest Precatalysts?

Efficient Electrooxidation of 5‐hydroxymethylfurfural Using Co‐Doped Ni3S2 Catalyst: Promising for H2 Production under Industrial‐Level Current Density

H 2 O 2 -assisted fabricate nickel cobalt sulfide as the efficient catalyst for the novel strategy of 5-hydroxymethylfurfural stepwise electrolysis

H2O2-assisted Fabricate Nickel Cobalt Sulfide As the Efficient Catalyst for the Novel Strategy of 5-Hydroxymethylfurfural Stepwise Electrolysis

Nickel-Vanadium Layered Double Hydroxides for Efficient and Scalable Electrooxidation of 5-Hydroxymethylfurfural Coupled with Hydrogen Generation

Electrochemical Oxidation of 5-Hydroxymethylfurfural with NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts

Realizing Efficient Electrochemical Oxidation of 5-Hydroxymethylfurfural on a Freestanding Ni(OH)2/nickel Foam Catalyst

A Facile Route to Efficient Water Oxidation Electrodes via Electrochemical Activation of Iron in Nickel Sulfate Solution

Unraveling the Electrooxidation Mechanism of 5-(Hydroxymethyl)furfural at a Molecular Level Via Nickel-Based Two-Dimensional Metal-Organic Frameworks Catalysts

Seawater-corrosion-engineered CoNi Electrode for Highly Efficient Oxidation of 5-(Hydroxymethyl)furfural

ZIF-67-derived FeCoNi-LDH with a 3D Nanoflower Hierarchical Structure for Highly Efficient Oxidation of 5-Hydroxymethylfurfural and Coupling Seawater Splitting Hydrogen Production

Simultaneous H2 Generation and Biomass Upgrading in Water by an Efficient Noble-Metal-Free Bifunctional Electrocatalyst.

Mechanistic Study on Electro-Oxidation of 5-Hydroxymethylfurfural and Water Molecules Via Operando Surface-Enhanced Raman Spectroscopy Coupled with an Fe3+ Probe

Constructing multifunctional ‘Nanoplatelet-on-Nanoarray’ electrocatalyst with unprecedented activity towards novel selective organic oxidation reactions to boost hydrogen production

Hydrogen‐Bond‐Assisted Electrocatalytic Semi‐Oxidation of 5‐Hydroxymethylfurfural into 2,5‐Diformylfuran by Operando Dissociated N‐Oxyl Mediator

Electrocatalysis of Furfural Oxidation Coupled with H2 Evolution Via Nickel‐Based Electrocatalysts in Water

In Situ Reconstruction of Helical Iron Borophosphate Precatalyst toward Durable Industrial Alkaline Water Electrolysis and Selective Oxidation of Alcohols

Composition-Dependent Dynamics of Nickel-Iron-Cobalt Metal Catalysts for Oxygen Evolution Reaction

In situ semi-etching of bimetallic LDH nanosheet arrays into FeNi-LDH/MOF to boost oxygen evolution reaction

Facile Synthesis of Nickel–Iron/Nanocarbon Hybrids As Advanced Electrocatalysts for Efficient Water Splitting