Abstract:Selective conversion of renewable sources is necessary for developing energy generation technology and protecting the environment. Herein, this work reports a one-step controllable synthesis of trimetallic NiCoFe-layered double hydroxides (NiCoFe-LDHs) nanosheets (1.36 nm) for both an efficient oxygen evolution reaction (OER) and highly selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMFOR) into value-added 2,5-furandicarboxylic acid (FDCA). For comparison, two sets of bimetallic NiCo- and NiFe-LDHs were similarly synthesized and evaluated. In the OER process, the optimal NiCoFe-LDHs nanosheets exhibited the lowest necessary overpotential (288 mV) to reach 10 mA cm–2 and the smallest Tafel slope of 92 mV dec–1 compared with NiCo-LDHs (347 mV, 115 mV dec–1) and NiFe-LDHs (303 mV, 108 mV dec–1). The performance was also superior to most previously reported LDHs catalysts. Additionally, NiCoFe-LDHs nanosheets exhibited a much smaller charge transfer resistance (Rct) of 1.0 Ω and a larger Cdl value of 2.62 mF cm–2 compared with NiCo-LDHs (2.1 Ω, 1.94 mF cm–2) and NiFe-LDHs (1.4 Ω, 2.22 mF cm–2), indicating fast catalytic kinetics. Furthermore, the NiCoFe-LDHs nanosheets possessed excellent durability over 10 h, much better than that of NiCo- and NiFe-LDHs. NiCoFe-LDHs catalysts also exhibited high performance in the oxidation of 5-hydroxymethylfurfural (HMF) to FDCA, which is a key precursor for the sustainable synthesis of polymers (e.g., polyethylene 2,5-furandicarboxylate (PEF)). An ultralow overpotential of 280 mV was required to achieve 20 mA cm–2, nearly 120 mV less than the activity in pure 1.0 M NaOH. The reaction intermediates and products were qualified by liquid chromatography–mass spectroscopy system (LC-MS) and LC, where 95.5% conversion of HMF and 84.9% yield of FDCA were obtained in 1 h. The reaction kinetics and possible pathways were further investigated. As a unique report utilizing trimetallic LDHs catalysts for OER and HMFOR, this study provides a promising perspective for energy conversion and electrocatalytic processing of biomass-derived monomers.

Electrochemical Oxidation of 5-Hydroxymethylfurfural with NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Structural Designs and Mechanism Insights into Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Engineering the Electronic Structure of NiFe Layered Double Hydroxide Nanosheet Array by Implanting Cationic Vacancies for Efficient Electrochemical Conversion of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Highly Active NiFe LDH anchoring on Cobalt Carbonate Hydroxide for Efficient Electrocatalytic 5-hydroxymethylfurfural oxidation towards 2,5-furandicarboxylic acid

Cross-linked α-Ni(OH) 2 nanosheets with a Ni 3+ -rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Trimetallic NiCoFe-Layered Double Hydroxides Nanosheets Efficient for Oxygen Evolution and Highly Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Electrochemical Oxidation of 5‐hydroxymethylfurfural on Nickel Nitride/Carbon Nanosheets: Reaction Pathway Determined by in Situ Sum Frequency Generation Vibrational Spectroscopy

Ultrathin layered double hydroxides nanosheets array towards efficient electrooxidation of 5-hydroxymethylfurfural coupled with hydrogen generation

Selective electrooxidation of 5-hydroxymethylfurfural at low working potentials promoted by 3D hierarchical Cu(OH)2@Ni3Co1-layered double hydroxide architecture with oxygen vacancies

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni3S2@NiFe-PBA nanocubes

Efficient Electrocatalytic Oxidation of 5-Hydroxymethylfurfural Coupled with 4-Nitrophenol Hydrogenation in a Water System

Efficient electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid using the facilely synthesized 3D porous WO3/Ni electrode

Preparation of NiO-N/C composites for electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid

NiFe Layered Double Hydroxide-Derived Catalysts with Remarkable Selectivity for the Oxidation of 5-Hydroxymethylfurfural to 2,5-Furanedicarboxylic Acid under Base-Free Conditions

Non-Noble Metal Catalysts for Electrooxidation of 5-Hydroxymethylfurfural

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni 3 S 2 @NiFe-PBA nanocubes

In-situ redispersion of Ni@C catalyst boosts 5-hydroxymethylfurfural electrooxidation by increasing Ni4+ sites

Highly Ordered Mesoporous Co3 O4 Electrocatalyst for Efficient, Selective, and Stable Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Tuning the adsorption behaviors of non-noble electrocatalysts to boost valorization of 5-hydroxymethylfurfural

Efficient oxidation of biomass derived 5-hydroxymethylfurfural into 2,5-diformylfuran catalyzed by NiMn layered double hydroxide