Abstract:Electrocatalytic water splitting driven by renewable energy is a potential approach to obtain green hydrogen. However, the relatively high overpotential of anodic oxygen evolution reaction (OER) is one of the main obstacles hindering the widespread popularity of water electrocatalysis technology. To this end, electrochemical hydrogen-evolution coupled with the oxidation of biomass derived platforms, such as replacing OER with thermodynamically favorable 5-hydroxymethylfurfural (HMF) oxidation reaction (HMFOR), provides an efficient strategy to lower energy utilization and co-producing valuable organic oxygenates. For instance, 2,5-furandicarboxylic acid (FDCA) is emerging as an important and value-added industrial chemical obtained from HMFOR, which can be used as the monomer of various sustainable bioplastics (e.g., polyesters, polyamides). Great efforts have been devoted to this arena on electrocatalyst engineering for better activity and product selectivity. However, less work has focused on the process scalability of HMFOR to FDCA. Here, we report a simple hydrothermal method to fabricate an array-structured nickel-vanadium layered double hydroxides (NiV-LDH) growth on nickel foam matrix, demonstrating large-sized (6 cm x 10 cm) synthesis of self-supported electrode. The as-prepared material is active and efficient for HMFOR, achieving 100 mA center dot cm(-2) of current density at 1.52 V vs. RHE (reversible hydrogen electrode) with 94.6% of Faradaic efficiency and 89.1% of yield to FDCA. Compared to traditional water splitting, replacing OER with HMFOR improves the counterpart hydrogen production rate by two-times. As proof-of-concept, we demonstrate the continuous and scalable HMFOR using a low-cost and membrane-free flow reactor system with electrode area of 49.5 cm(2). Under a constant current of 10 A, this system achieves high HMF single-pass conversion (94.8%), high FDCA concentration (similar to 186.8 mmol center dot L-1), and high FDCA selectivity (98.5%) using 200 mmol center dot L-1 of HMF feedstock at a flow rate of 3.62 mL center dot min(-1). Finally, gram-scale FDCA (119.5 g) can be obtained with hydrogen production using water electrolysis technology. This work highlights that catalyst design and system engineering should be coupled in the future rather than continuing in parallel directions.

Trimetallic NiCoFe-Layered Double Hydroxides Nanosheets Efficient for Oxygen Evolution and Highly Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Electrochemical Oxidation of 5-Hydroxymethylfurfural with NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts

Improved OER Catalytic Performance of NiFe-LDH with Hydrothermal Carbonization Microspheres

Cross-linked α-Ni(OH) 2 nanosheets with a Ni 3+ -rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Engineering the Electronic Structure of NiFe Layered Double Hydroxide Nanosheet Array by Implanting Cationic Vacancies for Efficient Electrochemical Conversion of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Highly Active NiFe LDH anchoring on Cobalt Carbonate Hydroxide for Efficient Electrocatalytic 5-hydroxymethylfurfural oxidation towards 2,5-furandicarboxylic acid

Highly selective and effective oxidation of 5-hydroxymethylfurfural by Co-Ni based electrodeposited bimetallic oxide nanostructures

Hierarchical Nickel–Cobalt‐Based Transition Metal Oxide Catalysts for the Electrochemical Conversion of Biomass into Valuable Chemicals

Selective electrooxidation of 5-hydroxymethylfurfural at low working potentials promoted by 3D hierarchical Cu(OH)2@Ni3Co1-layered double hydroxide architecture with oxygen vacancies

Regulating the Electronic Structure of Ni Sites in Ni(OH)2 by Ce Doping and Cu(OH)2 Coupling to Boost 5-Hydroxymethylfurfural Oxidation Performance

Tuning the adsorption behaviors of non-noble electrocatalysts to boost valorization of 5-hydroxymethylfurfural

Nickel-Vanadium Layered Double Hydroxides for Efficient and Scalable Electrooxidation of 5-Hydroxymethylfurfural Coupled with Hydrogen Generation

In-situ redispersion of Ni@C catalyst boosts 5-hydroxymethylfurfural electrooxidation by increasing Ni4+ sites

Defect‐Promoted Ni‐Based Layer Double Hydroxides with Enhanced Deprotonation Capability for Efficient Biomass Electrooxidation

Interface Engineering of the NiO/CeO2@NF Heterostructure to Boost the Electro-Oxidation of 5-Hydroxymethylfurfural

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni3S2@NiFe-PBA nanocubes

Heterogeneous interface induced Co3O4-NiO catalyst for efficient electrocatalytic 5-Hydroxymethylfurfural oxidation

Bifunctional MoNi4/Nickel Foam Electro-Catalyst for Ultra-Efficient Oxidation of High-Concentration 5-Hydroxymethylfurfural and HER

Efficient electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid using the facilely synthesized 3D porous WO3/Ni electrode

Facile synthesis of Co–Fe layered double hydroxide nanosheets wrapped on Ni-doped nanoporous carbon nanorods for oxygen evolution reaction

NiFe Layered Double Hydroxide-Derived Catalysts with Remarkable Selectivity for the Oxidation of 5-Hydroxymethylfurfural to 2,5-Furanedicarboxylic Acid under Base-Free Conditions