Abstract:Selective conversion of renewable sources is necessary for developing energy generation technology and protecting the environment. Herein, this work reports a one-step controllable synthesis of trimetallic NiCoFe-layered double hydroxides (NiCoFe-LDHs) nanosheets (1.36 nm) for both an efficient oxygen evolution reaction (OER) and highly selective oxidation of biomass-derived 5-hydroxymethylfurfural (HMFOR) into value-added 2,5-furandicarboxylic acid (FDCA). For comparison, two sets of bimetallic NiCo- and NiFe-LDHs were similarly synthesized and evaluated. In the OER process, the optimal NiCoFe-LDHs nanosheets exhibited the lowest necessary overpotential (288 mV) to reach 10 mA cm–2 and the smallest Tafel slope of 92 mV dec–1 compared with NiCo-LDHs (347 mV, 115 mV dec–1) and NiFe-LDHs (303 mV, 108 mV dec–1). The performance was also superior to most previously reported LDHs catalysts. Additionally, NiCoFe-LDHs nanosheets exhibited a much smaller charge transfer resistance (Rct) of 1.0 Ω and a larger Cdl value of 2.62 mF cm–2 compared with NiCo-LDHs (2.1 Ω, 1.94 mF cm–2) and NiFe-LDHs (1.4 Ω, 2.22 mF cm–2), indicating fast catalytic kinetics. Furthermore, the NiCoFe-LDHs nanosheets possessed excellent durability over 10 h, much better than that of NiCo- and NiFe-LDHs. NiCoFe-LDHs catalysts also exhibited high performance in the oxidation of 5-hydroxymethylfurfural (HMF) to FDCA, which is a key precursor for the sustainable synthesis of polymers (e.g., polyethylene 2,5-furandicarboxylate (PEF)). An ultralow overpotential of 280 mV was required to achieve 20 mA cm–2, nearly 120 mV less than the activity in pure 1.0 M NaOH. The reaction intermediates and products were qualified by liquid chromatography–mass spectroscopy system (LC-MS) and LC, where 95.5% conversion of HMF and 84.9% yield of FDCA were obtained in 1 h. The reaction kinetics and possible pathways were further investigated. As a unique report utilizing trimetallic LDHs catalysts for OER and HMFOR, this study provides a promising perspective for energy conversion and electrocatalytic processing of biomass-derived monomers.

Efficient electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid using the facilely synthesized 3D porous WO3/Ni electrode

Cu−Ni Bimetallic Hydroxide Catalyst for Efficient Electrochemical Conversion of 5‐hydroxymethylfurfural to 2,5‐furandicarboxylic Acid

Structural Designs and Mechanism Insights into Electrocatalytic Oxidation of 5-Hydroxymethylfurfural

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni3S2@NiFe-PBA nanocubes

Selective electrooxidation of 5-hydroxymethylfurfural at low working potentials promoted by 3D hierarchical Cu(OH)2@Ni3Co1-layered double hydroxide architecture with oxygen vacancies

Highly Ordered Mesoporous Co3 O4 Electrocatalyst for Efficient, Selective, and Stable Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Efficient electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid with Fe-Ni 3 S 2 @NiFe-PBA nanocubes

Electrochemical Oxidation of 5-Hydroxymethylfurfural with NiFe Layered Double Hydroxide (LDH) Nanosheet Catalysts

Electrocatalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid via metal-organic framework-structured hierarchical Co3O4 nanoplate arrays

Efficient Electrocatalytic Oxidation of 5-Hydroxymethylfurfural Coupled with 4-Nitrophenol Hydrogenation in a Water System

A Highly Efficient Nickel Phosphate Electrocatalyst for the Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

Non-Noble Metal Catalysts for Electrooxidation of 5-Hydroxymethylfurfural

Tuning the adsorption behaviors of non-noble electrocatalysts to boost valorization of 5-hydroxymethylfurfural

Selective Hydrogenation of Furfural to Furfuryl Alcohol Without External Hydrogen over N-doped Carbon Confined Co Catalysts

Highly Active NiFe LDH anchoring on Cobalt Carbonate Hydroxide for Efficient Electrocatalytic 5-hydroxymethylfurfural oxidation towards 2,5-furandicarboxylic acid

Cross-linked α-Ni(OH) 2 nanosheets with a Ni 3+ -rich structure for accelerating electrochemical oxidation of 5-hydroxymethylfurfural

Preparation of NiO-N/C composites for electrochemical oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid

Heterogeneous interface induced Co3O4-NiO catalyst for efficient electrocatalytic 5-Hydroxymethylfurfural oxidation

Trimetallic NiCoFe-Layered Double Hydroxides Nanosheets Efficient for Oxygen Evolution and Highly Selective Oxidation of Biomass-Derived 5-Hydroxymethylfurfural

Electrodeposited 3D hierarchical NiFe microflowers assembled from nanosheets robust for the selective electrooxidation of furfuryl alcohol

Engineering the Electronic Structure of NiFe Layered Double Hydroxide Nanosheet Array by Implanting Cationic Vacancies for Efficient Electrochemical Conversion of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid