Abstract:Only low‐mass‐ratio alloying element A (A represents alloying element, Ag or Mg in this work) is needed and the high active Li capacity is ensured. Li‐ion extracts form the Li‐A solid solution anode make alloying element A gradually get enriched on the electrode surface. Such an alloying element A rich electrode surface would reduce the Li nucleation barrier and help to achieve planar Li deposition during the Li plating process. The pursuit of high energy density Li‐based rechargeable batteries has intrigued numerous research interest on Li metal anode. However, several significant challenges, including severe parasitic reactions and growth of Li dendrites, lead to fast electrode failure and impede its practical implantation. Herein, it is revealed that the dynamic concentration of alloying element in Li solid solution can significantly improve the cycling stability. It is demonstrated that the alloying element of Li solid solution continuously evolved in the reaction layer on cycling. Alloying element got enriched on anode surface after Li stripping, and re‐dispersed into the deposited Li during Li plating processes. The alloying element‐rich surface can reduce the Li nucleation barrier and promote the uniform Li plating behavior. Ultrathin Li solid solution foils are fabricated, and the dynamic alloying element concentration mechanism is further verified, and the cycling lifespan of pure Li is doubled. Consequently, a 1.4 Ah laminated pouch cell with ultrathin Li solid solution anode (30 μm) exhibits high energy density of 836 Wh L−1 and stable cycling performance under the harsh conditions with low negative/positive capacity (N/P) ratio of 2 and electrolyte/capacity (E/C) ratio of 2.6 g Ah−1.

Aluminum foil negative electrodes with multiphase microstructure for all-solid-state Li-ion batteries

Single-material Aluminum Foil As Anodes Enabling High-Performance Lithium-Ion Batteries: the Roles of Prelithiation and Working Mechanism

Aluminum−lithium alloy as a stable and reversible anode for lithium batteries

Solid-solution based metal alloy phase for highly reversible lithium metal anode.

Asymmetric electrolyte design for high-energy lithium-ion batteries with micro-sized alloying anodes

Synergistic Surface and Bulk Engineering with Li-Riched D Ual-Phase Li-Al a Lloy a Node for Rational Regulation of L Ithium Deposition

Regulating electrodeposition morphology in high-capacity aluminium and zinc battery anodes using interfacial metal–substrate bonding

Artificial Interphase Design Employing Inorganic-Organic Components for High-Energy Lithium-Metal Batteries

In-situ Generated Li3N/Li-Al Alloy in Reduced Graphene Oxide Framework Optimizing Ultra-Thin Lithium Metal Electrode for Solid-State Batteries

Constructing a High‐Strength Solid Electrolyte Layer by In Vivo Alloying with Aluminum for an Ultrahigh‐Rate Lithium Metal Anode

Enabling Stable Lithium Metal Anode via 3D Inorganic Skeleton with Superlithiophilic Interphase

Enabling Superior Lithium Metal Anodes Via the In-Situ Construction of a Li-Sn Alloy/Lithium Halide Biphasic Interface Layer

A Self‐Reconfigured, Dual‐Layered Artificial Interphase Towards High‐Current‐Density Quasi‐Solid‐State Lithium Metal Batteries

Electrolyte design for LiF-rich solid–electrolyte interfaces to enable high-performance microsized alloy anodes for batteries

A Fast-Ion Conducting Interface Enabled by Aluminum Silicate Fibers for Stable Li Metal Batteries

An artificial layer enables in situ generation of a homogeneous inorganic/organic composite solid electrolyte interphase for stable lithium metal batteries

Lithium spreading layer consisting of nickel particles enables stable cycling of aluminum anode in all‐solid‐state battery

A Dual Lithiated Alloy Interphase Layer for High-Energy–density Lithium Metal Batteries

Dynamic Concentration of Alloying Element on Anode Surface Enabling Cycle‐Stable Li Metal Batteries

A 3D Framework with an In Situ Generated Li3N Solid Electrolyte Interphase for Superior Lithium Metal Batteries

A Stable Porous Aluminum Electrode with High Capacity for Rechargeable Lithium-Ion Batteries