Abstract:Lithium metal anode is recognized as the "Holy Grail" electrode because of its high specific capacity (3860 mAh/g) and low reduction potential (-3.04 V vs. standard hydrogen electrode), which is meaningful for batteries systems. Remarkable improvement of ionic conductivity of sulfide electrolyte exceeding 10 mS/cm at room temperature has opened up the opportunity to realized the commercialization of lithium metal anode. However, the practical implement of Li anode in solid-state batteries is hundered by the poor cycle stability and the low energy efficiency stemming from the unstable interfaces due to the ultrahigh reactivity of lithium metal. At the anode interface, the lithium dendrite growth and solid electrolytes (SE) reduction by lithium metal are serious challenges for lithium metal anode. To suppress the interfacial reactions and lithium dendrite formation at the sulfide electrolyte/Li metal anode interface, various strategies have been implemented by researchers, such as in situ formed robust SEI (solid electrolyte interface), surface modification and SE modification, etc. In this article, we focus on the artificial solid electrolyte interface (ASEI) to strengthening the Li metal and solid electrolyte interface. We fabricate the uniform LiF-rich ASEI using CF3(CF2)(3)OCH3 by heating at a temperature of 150 degrees C for 6 h. LiF layer at the interface between Li and sulfide electroyte could prevent Li dendrite growth. Compared to the Li/sulfide electrolyte interface, the Li/LiF/sulfide electrolyte interface is more stable. The symmetrical cell LiF@Li//Li6PS5Cl//LiF@Li (LiF@Li//LPSCl//LiF@Li) does not short-circuit after 40 cycles at the current density of 0.1 mAh/cm(2) with a lower polarization potential. A solid-state battery LiNbO2@LiCoO2//LPSCl//LiF@Li (LNO@LCO//LPSCl//LiF@Li) employing LiF coated Li metal as anode shows a high reversible discharge capacity of 138.4 mAh/g at 0.05 C and retains 110.9 mAh/g after 50 cycles. This interficial engineering for lithium metal and sulfide solid electrolyte provides new opportunity to commercialize the Li metal batteries.

A Fast-Ion Conducting Interface Enabled by Aluminum Silicate Fibers for Stable Li Metal Batteries

Stable Li Metal Anode with Protected Interface for High-Performance Li Metal Batteries

Synergistic effect of LixSi/Li3N artificial interface and 3D framework for enabling Dendrite-free, long-life lithium metal anodes

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

A Li3Bi/LiF interfacial layer enabling highly stable lithium metal anode

Cationic Interfacial Layer toward a LiF-Enriched Interphase for Stable Li Metal Batteries

Achieving High‐Power and Dendrite‐Free Lithium Metal Anodes Via Interfacial Ion‐Transport‐Rectifying Pump

A lithiophilic and conductive interlayer for dendrite-free lithium metal anodes

LiF‐Rich Alloy‐Doped SEI Enabling Ultra‐Stable and High‐Rate Li Metal Anode

Stabilization of Lithium Metal Interfaces by Constructing Composite Artificial Solid Electrolyte Interface with Mesoporous TiO2 and Perfluoropolymers

Electrolyte design for LiF-rich solid–electrolyte interfaces to enable high-performance microsized alloy anodes for batteries

Stable Lithium Metal Anode Enabled by a Lithiophilic and Electron/Ion Conductive Framework

Interficial Engineering of Lithium Metal Anode for Sulfide Solid State Batteries

Fluorinated Interface Layer with Embedded Zinc Nanoparticles for Stable Lithium-Metal Anodes.

Lithiophilic interface dynamic engineering to inhibit Li dendrite growth for intrinsically safe Li-metal batteries

Integrated Interface Configuration by In-Situ Interface Chemistry Enabling Uniform Lithium Deposition in All-Solid-state Lithium Metal Batteries

Porous Lithiophilic Li–Si Alloy‐Type Interfacial Framework via Self‐Discharge Mechanism for Stable Lithium Metal Anode with Superior Rate

Constructing a Lithiophilic and Mixed Conductive Interphase Layer in Electrolyte with Dual-Anion Solvation Sheath for Stable Lithium Metal Anode

Enabling Stable Lithium Metal Anode via 3D Inorganic Skeleton with Superlithiophilic Interphase

Coupling of ion-conducting interphase with lithiophilic-solid-oxide-electrolyte interlayer toward fast-charging lithium metal batteries

Simultaneously in-situ fabrication of lithium fluoride and sulfide enriched artificial solid electrolyte interface facilitates high stable lithium metal anode