Abstract:The commutation torque ripple of a brushless dc motor (BLDCM) in a six-step driving mode generates vibration noise. To minimize the commutation torque ripple of the BLDCM, this article analyzes the cause of torque ripple and establishes the model of torque ripple suppression by using the phase current predictive method based on the trapezoidal back electromotive force (EMF). In addition, based on the prediction model of the non-commutation phase current, the pulsewidth modulation model predictive control (PWM-MPC) algorithm is proposed. By changing the duty cycle with prior evaluation, the predictive control avoids commutation current hopping, thereby reducing torque ripple during commutation. This control approach is more accessible to be implemented, because it does not require changing the topology of the motor driving circuit. Simulation models of the proposed control scheme constructed in the MATLAB/Simulink environment are given, compared with the conventional square-wave driving method. Moreover, experiments are performed to verify the feasibility. The output torque during experiments is transmitted to the computer software through the torque transducer. Compared with the traditional driving methods, the simulation and experimental results show that the proposed novel algorithm in this article could suppress the torque ripple efficiently.

A Composite Model Predictive Control Method of SRMs with PWM-based Signal for Torque Ripple Suppression

Optimized Direct Instantaneous Torque Control for SRMs With Efficiency Improvement

Investigation Of Direct Torque Control And Torque Sharing Function Strategy For Switched Reluctance Motor Applications

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

Harmonic Injection-Based Torque Ripple Reduction of PMSM with Improved DC-Link Voltage Utilization

Torque ripple minimization for switched reluctance motors by online modification of torque sharing function

A Novel Dead-Beat Torque Control of Switched Reluctance Machines

A Novel Boost Chopper Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

A Combined Model Predictive Current Control for SPMSM Drive with Improved Robustness and Control Precision

Model Predictive Control of Switched Reluctance Machines for Suppressing Torque and Source Current Ripples Under Bus Voltage Fluctuation

A Modified Deadbeat Predictive Flux Control for Reducing Torque Ripple at Low Modulation Ratio

Improved Model Predictive Current Control for PMSM Drives Based on Dynamic Reference Current

Attenuation Of Pmsm Torque-Ripple Based On Combination Of Equivalent-Input-Disturbance Approach And Sliding-Mode Control

A modified model predictive current control of SRMs for torque ripple suppression

Experimental analysis of enhanced finite set model predictive control and direct torque control in SRM drives for torque ripple reduction

Model Predictive Control Method of Torque Ripple Reduction for BLDC Motor

Hybrid Svpwm Technique for Reduced Torque Ripple in Permanent Magnet Synchronous Motor

A Novel Torque Ripple Reduction Strategy for Predictive Direct Torque Controlled Pmsg

Model Predictive Control Strategies in Switched Reluctance Motor Drives – an Overview

Torque Ripple Suppression Method of Switched Reluctance Motor Based on an Improved Torque Distribution Function

An Improved Model Predictive Torque Control for PMSM Drives Based on Discrete Space Vector Modulation