Abstract:Solution-processed semiconductors have opened promising avenues for next-generation semiconductor and optoelectronic industries. Colloidal quantum dots (QDs) as one of the most typical materials are widely utilized for the design and development of light-emitting diodes, photodetectors, and solar cells. Recently, an emerging process of PbS QD ink has been employed to attain world record power conversion efficiency by surface passivation using a PbI2 ligand to form PbI2–PbS and the process optimization in the field of photovoltaics. However, the bonding and debonding of the ligands on the surface of PbS QDs are dynamic reversible processes in an ink environment. The uncoordinated Pb2+ defects induced by unbonded PbS QDs serve as the recombination sites. Thus, the present ink process leaves much room for the enhancement by surface passivation of PbS QDs. Herein, we devise an efficient strategy with a supplementary phenethylammonium iodide (PEAI) ligand for the formation of the PEAI–PbS interface in PbS QD ink-processed solar cells. This newly developed method can not only improve the passivation on the QD surface by iodine ions but also simultaneously enhance the carrier collection efficiency by a graded energy alignment between PbI2–PbS and PEAI–PbS layers. The corresponding power conversion efficiency of the optimized device has significantly increased by approximately 20% more than the control device. As a result, such a robust and efficient method regarded as a strategic candidate can overcome the bottleneck of imperfect passivation caused by a large specific surface area and loose bonding ligands, eventually promoting the industrial application of QDs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c08135?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c08135</a>.Absorbance results, description for detailed testing conditions, TEM images of OA–PbS QDs, XPS spectra of QD films about I 3d signal, FTIR data for QD films, device performances of PbS QDs by different supplemental treatment condition (ligands/concentration/annealing temperature/immersing time/solvents), AFM images of control and PEAI-QD films, XRD of QD films, SEM image of control and PEAI-QD films, UPS of ZnO and EDT–PbS QD films, TA results of control and PEAI-QD films, EIS spectra of the photovoltaic devices, and device performance as a function of CQD film thickness (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c08135/suppl_file/am0c08135_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficiency improvement in thin-film amorphous silicon solar cells based on PbS quantum dots

Impacts of Post-metallisation Processes on the Electrical and Photovoltaic Properties of Si Quantum Dot Solar Cells

Performance optimization of efficient PbS quantum dots solar cells through numerical simulation

Dual-interface modification effect of Carbon Quantum Dots on the performance of Polymer Solar Cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction (adv. Energy Mater. 35/2022)

Performance enhancement of PbS‐TBAI quantum dot solar cell with MoTe2 as hole transport layer

Investigating the effect of different quantum dots on the absorption spectrum and characteristics of quantum dot sensitized solar cells

Over 15% Efficiency PbS Quantum‐Dot Solar Cells by Synergistic Effects of Three Interface Engineering: Reducing Nonradiative Recombination and Balancing Charge Carrier Extraction

Optimizing Energy Levels and Improving Film Compactness in PbS Quantum Dot Solar Cells by Silver Doping

Optimizing Surface Passivation of n‐Type Quantum Dots for Efficient PbS Quantum Dot Solar Cells

Interfacial Heterojunction Enables High Efficient PbS Quantum Dot Solar Cells

The Effect of Quantum Dots on the Performance of the Solar Cell

Down-Shifting and Anti-Reflection Effect of CsPbBr3 Quantum Dots/Multicrystalline Silicon Hybrid Structures for Enhanced Photovoltaic Properties

Efficient PbS Quantum Dot Solar Cells with Both Mg-Doped ZnO Window Layer and ZnO Nanocrystal Interface Passivation Layer.

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

Solution Annealing Induces Surface Chemical Reconstruction for High-Efficiency PbS Quantum Dot Solar Cells

Enhanced Passivation and Carrier Collection in Ink-Processed PbS Quantum Dot Solar Cells via a Supplementary Ligand Strategy

Performance Enhancement of Crystal Silicon Solar Cell by a CsPbBr3‐Cs4PbBr6 Perovskite Quantum Dot @ZnO/ Ethylene Vinyl Acetate Copolymer Down‐Shifting Composite Film

Design and optimization of the performance of PbS quantum dot based vertical photodetector

Boosting the efficiency of quantum dot–sensitized solar cells over 15% through light‐harvesting enhancement

The approach of increasing incident photon absorption and decreasing charge recombination in solar cells by regulating the bandgap energies of the CdSe 0.3 S 0.7 /CdSe photosensitizer layer