Abstract:Obtaining a perovskite light-absorbing layer with good crystallization, low defect concentration, good stability, and well-matched energy levels is critical to obtaining high-efficiency perovskite solar cells (PSCs). Here, a hybrid PSC with a graded band gap is explored using MAPbBr3 (MA = CH3NH3) and MAPbBr0.9I2.1 quantum dots (QDs) as component cells. We have creatively designed a solar cell device with a double-QD structure [indium tin oxide (ITO)/SnO2/perovskite:MAPbBr3 QDs/MAPbBr0.9I2.1 QDs/Spiro-OMeTAD/Au]. A better crystal film of the perovskite absorption layer can be obtained because the MAPbBr3 QDs are doped in an antisolvent, which induces nucleation and growth in the polycrystalline perovskite. In addition, we expect that digestive ripening occurred in the crystallization, and the oleic acid ligands on the surface of the QDs disintegrate during the doping process and transfer to the surface of the perovskite absorption layer finally; it follows that the hydrophobicity and stability of the perovskite film are greatly enhanced. Moreover, a thin film of MAPbBr0.9I2.1 QDs is introduced between the perovskite absorption layer and the hole layer, acting as an energy-level ladder, which leads to well-matched energy levels, an increase in fill factor (FF), and an enhanced hole transport capability. In particular, the mechanism of the crystallization process involving the effect of oleic acid ligands on the interior and surface of the perovskite film is fully discussed here. The final research results from the PSCs show that both high efficiency and long-term stability are achieved successfully by this design strategy.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c14191?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c14191</a>.Parameters of carrier lifetimes in TRPL, parameters and calculated values in the Owens two-liquid method experiment, and J–V parameters; QD dispersion images; AFM images; perovskite film images; contact-angle test images; EIS spectrum; and boxplot of J–V parameters (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c14191/suppl_file/am0c14191_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Performance Enhancement of Crystal Silicon Solar Cell by a CsPbBr3‐Cs4PbBr6 Perovskite Quantum Dot @ZnO/ Ethylene Vinyl Acetate Copolymer Down‐Shifting Composite Film

Performance Enhancement of Crystal Silicon Solar Cell by a CsPbBr3–Cs4PbBr6 Perovskite Quantum Dot @zno/ethylene Vinyl Acetate Copolymer Downshifting Composite Film

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Down-Shifting and Anti-Reflection Effect of CsPbBr3 Quantum Dots/Multicrystalline Silicon Hybrid Structures for Enhanced Photovoltaic Properties

Large-scale Preparation of CsPbBr3 Perovskite Quantum dot/EVA Composite Adhesive Film by Melting for Crystal Silicon Solar Cell

Quantum Dot Interface-Mediated CsPbIBr 2 Film Growth and Passivation for Efficient Carbon-Based Solar Cells

Large-scale preparation of CsPbBr3perovskite quantum dot/EVA composite adhesive film by melting for crystal silicon solar cell

Quantum Dots Encapsulated by ZrO 2 Enhance the Stability of Perovskite Solar Cells

Synergistic Improvement of Perovskite Film Quality for Efficient Solar Cells Via Multiple Chloride Salt Additives

Fluorescence Resonance Energy Transfer Effect Enhanced High Performance of Si Quantum Dots/CsPbBr3 Inverse Opal Heterostructure Perovskite Solar Cells

Performance Enhancement of Hole Transport Layer-Free Carbon-Based CsPbIBr2 Solar Cells through the Application of Perovskite Quantum Dots

Continuously in-situ manufacture of perovskite quantum dots/POE encapsulation adhesive film for silicon solar cell enhancement application

CH 3 NH 3 PbBr 3– x I x Quantum Dots Enhance Bulk Crystallization and Interface Charge Transfer for Efficient and Stable Perovskite Solar Cells

Passivation Effect of CsPbI3 Quantum Dots on the Performance and Stability of Perovskite Solar Cells

CsPbBr3 quantum dots assisted crystallization of solution-processed perovskite films with preferential orientation for high performance perovskite solar cells

Enhancing the Performance of Perovskite Solar Cells by Hybridizing SnS Quantum Dots with CH3NH3PbI3

ZnPc/CsPbBr 3 QDs collaborative interface modification to improve the performance of CsPbBr 3 perovskite solar cells

Electric field enhanced with CdS/ZnS quantum dots passivation for efficient and stable perovskite solar cells

Flexible and efficient perovskite quantum dot solar cells via hybrid interfacial architecture

Perovskite Quantum Dot/Zinc Oxide Composite Films for Enhanced Luminance

Healing the defects in CsPbI3 solar cells by CsPbBr3 quantum dots