Abstract:Polyaniline (PANI), as one of the most promising electrode materials for flexible supercapacitors, facing the problems of limited capacitive properties and poor cycling stability. Herein, we demonstrate that dopants have a great effect on the electrochemical performance of PANI and selecting a suitable dopant can be used as an effective way for enhancing the electrochemical behavior of PANI electrode. All PANI electrodes were synthesized by electropolymerization method using hydrochloric acid (HCl), perchloric acid (HClO4), sulfuric acid (H2SO4), p-toluenesulfonic acid (p-TSA), phosphoric acid (H3PO4) and phytic acid (PA) as dopants, respectively. The influence of dopants on morphology, doping level, redox sites accessibility and electrochemical performance of PANI electrodes were studied systematically. The results show that, PANI/HClO4 has the best capacitive behavior with a maximum specific capacity of 1341 C g−1 at 5 mV s−1 along with a 57 % capacity retention after 2000 cycles. Moreover, PANI/p-TSA shows the best cycling stability with 70% of capacity retention after 2000 cycles accompanied with a relatively high specific capacity (722 C g−1 at 5 mV s−1). Furthermore, PANI/HClO4 and PANI/p-TSA were used as electrodes for the fabrication of flexible all-solid-state symmetric supercapacitors. Results indicate that PANI/HClO4 device has higher energy density (12.57 Wh kg−1 at 283 W kg−1) than that of PANI/p-TSA (8.86 Wh kg−1 at 199 W kg−1). In contrast, PANI/p-TSA device with a capacity retention over 80% after 3000 cycles has better stability than PANI/HClO4 device which maintain 73% capacity after 3000 cycles. This fundamental study provides a much easier route in achieving high performance flexible PANI-based electrodes and opens new opportunities for facilitating PANI-based electrodes as promising candidates for wearable electronics.

Preliminary Study of Utilizing Polyaniline as Electrode Material for Supercapacitor Application: Juxtaposition of Electrochemical Performances

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Preparation of Polyaniline/activated Carbon Used for Supercapacitor Film Electrode by Cyclic Voltammetry

Polyaniline-Manganese dioxide nanorods nanocomposite as an electrode material for supercapacitors

Electrochemical Deposition of PANI/PEDOT:PSS Composite Polymer for Supercapacitors Application

Studies on Preparation and Electrochemical Properties of Electrochromic Conductive Polyaniline Solid Supercapacitor

Activated Carbon Coated with Polyaniline As an Electrode Material in Supercapacitors

Polyaniline-deposited porous carbon electrode for supercapacitor

Three-dimensional Carbon Nanotube/ethylvinylacetate/polyaniline As a High Performance Electrode for Supercapacitors

Development of PANI/FeS2/MnO2 Composite Electrode Materials for High‐Performance Supercapacitors

Polyaniline and rare earth metal oxide composition: A distinctive design approach for supercapacitor

Exploring the potential of polyaniline-calcium titanate (PANI-CaTiO3) nanocomposites in supercapacitors: Synthesis and electrochemical investigation

Recent Advancements of Polyaniline/Metal Organic Framework (PANI/MOF) Composite Electrodes for Supercapacitor Applications: A Critical Review

Facile Fabrication of Polyaniline/Pbs Nanocomposite for High-Performance Supercapacitor Application

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors

In-situ Electropolymerization of Porous Conducting Polyaniline Fibrous Network for Solid-State Supercapacitor

Electrochemical characterization of electrospun Co3O4/PAN-based carbon nanofiber composites for supercapacitor applications

Synthesis and electrochemical testing of novel doped polyaniline and biomass‐derived carbon‐based composite for supercapacitors

Nickel Oxide-Incorporated Polyaniline Nanocomposites as an Efficient Electrode Material for Supercapacitor Application

Biomass-based nitrogen-doped carbon/polyaniline composite as electrode material for supercapacitor devices

Electropolymerization of polyaniline as high-performance binder free electrodes for flexible supercapacitor