Abstract:Polyaniline (PANI), as one of the most promising electrode materials for flexible supercapacitors, facing the problems of limited capacitive properties and poor cycling stability. Herein, we demonstrate that dopants have a great effect on the electrochemical performance of PANI and selecting a suitable dopant can be used as an effective way for enhancing the electrochemical behavior of PANI electrode. All PANI electrodes were synthesized by electropolymerization method using hydrochloric acid (HCl), perchloric acid (HClO4), sulfuric acid (H2SO4), p-toluenesulfonic acid (p-TSA), phosphoric acid (H3PO4) and phytic acid (PA) as dopants, respectively. The influence of dopants on morphology, doping level, redox sites accessibility and electrochemical performance of PANI electrodes were studied systematically. The results show that, PANI/HClO4 has the best capacitive behavior with a maximum specific capacity of 1341 C g−1 at 5 mV s−1 along with a 57 % capacity retention after 2000 cycles. Moreover, PANI/p-TSA shows the best cycling stability with 70% of capacity retention after 2000 cycles accompanied with a relatively high specific capacity (722 C g−1 at 5 mV s−1). Furthermore, PANI/HClO4 and PANI/p-TSA were used as electrodes for the fabrication of flexible all-solid-state symmetric supercapacitors. Results indicate that PANI/HClO4 device has higher energy density (12.57 Wh kg−1 at 283 W kg−1) than that of PANI/p-TSA (8.86 Wh kg−1 at 199 W kg−1). In contrast, PANI/p-TSA device with a capacity retention over 80% after 3000 cycles has better stability than PANI/HClO4 device which maintain 73% capacity after 3000 cycles. This fundamental study provides a much easier route in achieving high performance flexible PANI-based electrodes and opens new opportunities for facilitating PANI-based electrodes as promising candidates for wearable electronics.

Polyaniline and rare earth metal oxide composition: A distinctive design approach for supercapacitor

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors

Design and construction of low resistance copper doped polyaniline electrode with ultrahigh loading density for high performance supercapacitor applications

Sandwich-like high-load MXene/polyaniline film electrodes with ultrahigh volumetric capacitance for flexible supercapacitors.

Development of PANI/FeS2/MnO2 Composite Electrode Materials for High‐Performance Supercapacitors

Polyaniline-deposited porous carbon electrode for supercapacitor

High-performance electrochemical supercapacitors based on polyoxometalate integrated into polyaniline and activated carbon nanohybrid

A new nanocomposite: Carbon cloth based polyaniline for an electrochemical supercapacitor

Facile Synthesis of a Ni-based NiCo2O4-PANI Composite for Ultrahigh Specific Capacitance

Boosting the Utilization and Electrochemical Performances of Polyaniline by Forming a Binder-Free Nanoscale Coaxially Coated Polyaniline/Carbon Nanotube/Carbon Fiber Paper Hierarchical 3D Microstructure Composite as a Supercapacitor Electrode

Facile Fabrication of Polyaniline/Pbs Nanocomposite for High-Performance Supercapacitor Application

Electropolymerization of polyaniline as high-performance binder free electrodes for flexible supercapacitor

Synergistic Capacitive Behavior Between Polyaniline and Carbon Black

Development of PANI/CuMn2O4 nanocomposite via hydrothermal method for supercapacitor applications

Polyaniline combining with ultrathin manganese dioxide nanosheets on carbon nanofibers as effective binder-free supercapacitor electrode

Preliminary Study of Utilizing Polyaniline as Electrode Material for Supercapacitor Application: Juxtaposition of Electrochemical Performances

Preparation and comparison of polyaniline composites with lotus leaf-derived carbon and lotus petiole-derived carbon for supercapacitor applications

Electrochemical Deposition of PANI/PEDOT:PSS Composite Polymer for Supercapacitors Application

Carboxylated multi-walled carbon nanotube/polyaniline composites for high-performance supercapacitor electrodes

Polyaniline-Manganese dioxide nanorods nanocomposite as an electrode material for supercapacitors

Cobalt-nickel coordinated polyaniline as electrodes for high performance flexible asymmetric supercapacitor