Abstract:Polyaniline (PANI) is considered as an attractive electrode material in energy storage devices. Here, self-supported porous conducing PANI fibrous network is in-situ deposited on carbon paper (CP) via a facile electropolymerization method for solid-state supercapacitor. We also explicate the possible growth mechanism of nanofiber network based on the morphology evolution. Combined with high specific surface area (42.2-96.3 m(2) g(-1)), controllable loading capacity (10 mu g cm(-2) cycle(-1)) and superior conductivity (1.13-1.98 S cm(-1)), the composite electrodes are further proved with FTIR, Raman, XPS and UV-Vis spectra. The capacitance performances are systematically investigated via cyclic voltammetry, galvanostatic charge/discharge curves and electrochemical impedance spectroscopy. As-prepared CP/PANI-80 hybrid electrode exhibits mass capacitance of 455.1 F g(-1) under 0.5 A g(-1) with pseudo-capacitive contribution -58.4%. Meanwhile, the gravimetric capacitances of composite electrodes follow a decline trend with increase of loading capacity as the effective utilization rate and specific surface area of active PANI. Then, the solid-state supercapacitor device assembled delivers mass capacitance of 149.3 F g(-1) and presents admirable energy density of 13.3 Wh kg(-1) with power density 80 W kg(-1) in PVA/H2SO4 electrolyte. Moreover, solid-state device exhibits favorable self-discharge behavior with low leakage current as small as 27.5 mu A, distinct long time cycling stability with capacitance retention of 81.6% after 4000 continuous cycles. Above encouraging results could illustrate the great promise of this method and tremendous potential of PANI fibrous network electrodes in solid-state energy-storage systems.

Activated Carbon Coated with Polyaniline As an Electrode Material in Supercapacitors

Preparation of Polyaniline/activated Carbon Used for Supercapacitor Film Electrode by Cyclic Voltammetry

Polyaniline-deposited porous carbon electrode for supercapacitor

Three-dimensional Carbon Nanotube/ethylvinylacetate/polyaniline As a High Performance Electrode for Supercapacitors

Hierarchically Porous Carbon Cloth–Polyaniline (CC–PANI) Composite Supercapacitor Electrodes with Enhanced Stability

Dulse-derived Porous Carbon-Polyaniline Nanocomposite Electrode for High-Performance Supercapacitors

Synthesis of Polyaniline Nanoparticles Deposited on Two-Dimensional Titanium Carbide for High-Performance Supercapacitors

Biomass-based nitrogen-doped carbon/polyaniline composite as electrode material for supercapacitor devices

Graphene/Polyaniline Nanofiber Composites as Supercapacitor Electrodes

Polyaniline-modified graphitic carbon nitride as electrode materials for high-performance supercapacitors

A new nanocomposite: Carbon cloth based polyaniline for an electrochemical supercapacitor

The Effect of Carbon Particle Morphology on the Electrochemical Properties of Nanocarbon/polyaniline Composites in Supercapacitors

Synthesis of Biomass-Based Porous Carbon Nanofibre/Polyaniline Composites for Supercapacitor Electrode Materials

Vapor deposition polymerization of aniline on 3D hierarchical porous carbon with enhanced cycling stability as supercapacitor electrode

Semi-Polycrystalline Polyaniline-Activated Carbon Composite for Supercapacitor Application

In-situ Electropolymerization of Porous Conducting Polyaniline Fibrous Network for Solid-State Supercapacitor

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors

Preliminary Study of Utilizing Polyaniline as Electrode Material for Supercapacitor Application: Juxtaposition of Electrochemical Performances

Preparation of graphene nanosheet/carbon nanotube/polyaniline composite as electrode material for supercapacitors

High-performance electrochemical supercapacitors based on polyoxometalate integrated into polyaniline and activated carbon nanohybrid

One-Step Electrodeposition of Polyaniline Nanorods on Carbon Cloth for High-Performance Flexible Supercapacitors