Abstract:Polyaniline (PANI) is considered as an attractive electrode material in energy storage devices. Here, self-supported porous conducing PANI fibrous network is in-situ deposited on carbon paper (CP) via a facile electropolymerization method for solid-state supercapacitor. We also explicate the possible growth mechanism of nanofiber network based on the morphology evolution. Combined with high specific surface area (42.2-96.3 m(2) g(-1)), controllable loading capacity (10 mu g cm(-2) cycle(-1)) and superior conductivity (1.13-1.98 S cm(-1)), the composite electrodes are further proved with FTIR, Raman, XPS and UV-Vis spectra. The capacitance performances are systematically investigated via cyclic voltammetry, galvanostatic charge/discharge curves and electrochemical impedance spectroscopy. As-prepared CP/PANI-80 hybrid electrode exhibits mass capacitance of 455.1 F g(-1) under 0.5 A g(-1) with pseudo-capacitive contribution -58.4%. Meanwhile, the gravimetric capacitances of composite electrodes follow a decline trend with increase of loading capacity as the effective utilization rate and specific surface area of active PANI. Then, the solid-state supercapacitor device assembled delivers mass capacitance of 149.3 F g(-1) and presents admirable energy density of 13.3 Wh kg(-1) with power density 80 W kg(-1) in PVA/H2SO4 electrolyte. Moreover, solid-state device exhibits favorable self-discharge behavior with low leakage current as small as 27.5 mu A, distinct long time cycling stability with capacitance retention of 81.6% after 4000 continuous cycles. Above encouraging results could illustrate the great promise of this method and tremendous potential of PANI fibrous network electrodes in solid-state energy-storage systems.

Vapor deposition polymerization of aniline on 3D hierarchical porous carbon with enhanced cycling stability as supercapacitor electrode

Construction of Hierarchical 2D PANI/Ni3S2 Nanosheet Arrays on Ni Foam for High-Performance Asymmetric Supercapacitors

Construction of Hierarchical 2D PANI/Ni<sub>3</sub>S<sub>2</sub> Nanosheet Arrays on Ni Foam for High-Performance Asymmetric Supercapacitors

Three-dimensional Carbon Nanotube/ethylvinylacetate/polyaniline As a High Performance Electrode for Supercapacitors

Construction of hierarchical graphene/polyaniline@polyaniline electrodes by chemical and electrochemical polymerization for high-energy supercapacitors

Boosting the Utilization and Electrochemical Performances of Polyaniline by Forming a Binder-Free Nanoscale Coaxially Coated Polyaniline/Carbon Nanotube/Carbon Fiber Paper Hierarchical 3D Microstructure Composite as a Supercapacitor Electrode

A Novel Sustainable Flour Derived Hierarchical Nitrogen-Doped Porous Carbon/Polyaniline Electrode for Advanced Asymmetric Supercapacitors

Activated Carbon Coated with Polyaniline As an Electrode Material in Supercapacitors

In-situ Electropolymerization of Porous Conducting Polyaniline Fibrous Network for Solid-State Supercapacitor

Hierarchically Porous Carbon Cloth–Polyaniline (CC–PANI) Composite Supercapacitor Electrodes with Enhanced Stability

Construction of Ultrathin Nitrogen-Doped Porous Carbon Nanospheres Coated With Polyaniline Nanorods for Asymmetric Supercapacitors

Growth of polyaniline nanowhiskers on mesoporous carbon for supercapacitor application

Novel three-dimensional polyaniline nanothorns vertically grown on buckypaper as high-performance supercapacitor electrode

Hierarchical porous polyaniline supercapacitor electrode from polyaniline/silica self- aggregates

Polyaniline-deposited porous carbon electrode for supercapacitor

Synthesis of Biomass-Based Porous Carbon Nanofibre/Polyaniline Composites for Supercapacitor Electrode Materials

Fabrication of PANI@Ti3C2Tx/PVA hydrogel composite as flexible supercapacitor electrode with good electrochemical performance

TiO2-C Nanowire Arrays@polyaniline Core-Shell Nanostructures on Carbon Cloth for High Performance Supercapacitors

Synthesis of Polyaniline Nanoparticles Deposited on Two-Dimensional Titanium Carbide for High-Performance Supercapacitors

Fabrication of Free-Standing Hierarchical Carbon Nanofiber/Graphene Oxide/Polyaniline Films for Supercapacitors

Construction of tunable ZnCoO x /C-PANI electrode materials for high-performance supercapacitors