Abstract:The lithium (Li)-metal anode is deemed as the "holy gray" of the next-generation Li-metal system because of its high theoretical specific capacity, minimal energy density, and lowest standard electrode potential. Nevertheless, its commercial application has been limited by the large volume variation during charge and discharge, the unstable interface between the Li metal and electrolyte, and uneven deposition of Li. Herein, we present a 3D host (Cu) with lithiophilic matrix (CuO and SnO2) in situ modification via a facile ammonia oxidation method to serve as a current collector for the Li-metal anode. The 3D Cu host embellished by CuO and SnO2 is abbreviated as 3D CSCC. By increasing interfacial activity, lowering the nucleation barrier, and accommodating changes in volume of the Li metal, the 3D CSCC electrode effectively demonstrates a homogeneous and dendrite-free deposition morphology with an excellent cycling performance up to 3000 h at a 1.0 mA cm–2 current density. Additionally, the full cells paired with CSCC anodes and LiCoO2 cathodes show good capacity retention performance at 0.2 C.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c13896.XPS survey spectrum of 3D CSCC; EDS mapping images of 3D CSCC; SEM images of various amounts of Li plating in 3D CSCC with a current density of 1.0 mA cm-2; SEM images of various amounts of Li stripping in Cu foil with a current density of 1.0 mA cm-2; SEM images of various amounts of Li stripping in 3D CSCC with a current density of 1.0 mA cm-2; plating/stripping SEM images of 10 and 50 cycles in 3D CSCC at a current density of 1.0 mA cm-2 with a density of 1.0 mA h cm-2; 10th, 50th, 100th, and 200th circles of voltage profiles of Li plating/stripping on 3D CSCC at a current density of 0.5 mA cm-2 with a capacity of 0.5 mA h cm-2; voltage–time profiles of the Li-plated plane 3D CSCC and the Cu foil current collector Li||Li symmetric cell; detailed voltage profiles of 3D CSCC and the Cu foil current collector electrodes in symmetric cells at a current density of 1.0 mA cm-2 with a capacity of 1.0 mA h cm-2; voltage profiles of the Li-plated CSCC||Li symmetric cell at increasing current densities from 0.5 to 1.0, 2.0, and 4.0 mA cm-2 for a 1.0 mA h cm-2 capacity; cycling performances of LCo|| CSCC cells at a rate of 1 C and 2 C; EIS of 3D CSCC and the Cu foil current collector in different electrolytes; and voltage profiles of Li plating on 3D CSCC with a capacity of 1.0 mA h cm-2 at a current density of 1.0 mA cm-2 in different electrolytes (PDF)This article has not yet been cited by other publications.

Comparison of Different Current Collector Materials for In Situ Lithium Deposition with Slurry-Based Solid Electrolyte Layers

Current collectors’ effects on the electrochemical performance of LiNi0·6Co0·2Mn0·2O2 suspension electrodes for lithium slurry battery

Facile Electroless Plating Method to Fabricate a Nickel-Phosphorus-Modified Copper Current Collector for a Lean Lithium-Metal Anode.

Investigation of Solid Electrolyte Interface Formation in Li3as Electrode Material in a Solid-State Battery Configuration

Engineering Moderately Lithiophilic Paper-Based Current Collectors with Variable Solid Electrolyte Interface Films for Anode-Free Lithium Batteries

Electroforming as a Novel One-Step Manufacturing Method of Structured Aluminum Foil Current Collectors for Lithium-Ion Batteries

Uniform Deposition of Li-Metal Anodes Guided by 3D Current Collectors with In Situ Modification of the Lithiophilic Matrix

Study on Stable Lithiophilic Ag Modification Layer on Copper Current Collector for High Coulombic-Efficiency Lithium Metal Anode

A Scalable Slurry Process To Fabricate A 3d Lithiophilic And Conductive Framework For A High Performance Lithium Metal Anode

Air-Stable Lithium-Sandwiched Current Collector for Non-Destructive, Thermally Safe, and Sustained Supplementary Lithiation

Anodic Stabilities of Various Metals as the Current Collector in High Concentration Electrolytes for Lithium Batteries

Investigations on the Initial-Stages of Lithium Deposition/Dissolution Processes in Sulfolane Based Electrolytes

Exchange of Li and AgNO 3 Enabling Stable 3D Lithium Metal Anodes with Embedded Lithophilic Nanoparticles and a Solid Electrolyte Interphase Inducer

A scalable slurry process to 3D lithiophilic and conductive framework for high performance lithium metal anode

LiI-Doped Sulfide Solid Electrolyte: Enabling a High-Capacity Slurry-Cast Electrode by Low-Temperature Post-Sintering for Practical All-Solid-State Lithium Batteries

Investigating the Structure and Performance Differences between the Electrodes Made by a Dry and a Wet Slurry Processes

The Effect of Silver Particle Distribution in a Carbon Nanocomposite Interlayer on Lithium Plating in Anode-Free All-Solid-State Batteries

Mediating Lithium Plating/Stripping by Constructing 3D Au@Cu Pentagonal Pyramid Array

Investigating the Structure and Performance of Electrodes Made by Dry and Wet Slurry Processes

Slurry‐Fabricable Li+‐Conductive Polymeric Binders for Practical All‐Solid‐State Lithium‐Ion Batteries Enabled by Solvate Ionic Liquids

Lithiophilic liquid metal layer induced lithium plating/stripping in 3D Cu matrix to mitigate lithium dendrites and volume expansion