Abstract:Due to the excellent physical and chemical properties, carbon nanotubes show broad applications in a variety of fields such as composite materials, catalysis, energy, medicine and sensor. However, at present, the carbon nanotubes are mainly practically used in the form of powders. Carbon nanotube fibers can be prepared by the methods of chemical vapor deposition and/or dry spinning. However, the carbon source used in previous study mainly has single component, making the mechanical and electrical properties of carbon nanotube fibers still difficult to effectively meet the practical application requirements. It remains challenging to realize continuous preparation of high-performance carbon nanotube fibers. In this work, a new cycloalkane/ethanol mixing carbon source was designed to obviously promote the continuous growth process and properties of carbon nanotube fibers. After carefully optimizing the component ratio of decahydronaphthalene/ethanol in the precursor solution, and systematically optimizing reaction conditions such as catalyst content (ferrocene and thiophene), injection rate of the precursor solution, and the flow rate of carrier gas (argon and hydrogen), the continuous preparation of high-performance carbon nanotube fibers was realized. When the mass ratio of decahydronaphthalene to ethanol carbon source in precursor solution is 3:7, the high-performance carbon nanotube fibers can be continuously produced for a long time with a collection rate of 220 m/h. It shows improved mechanical and electrical properties compared with the carbon nanotube fiber prepared by using single ethanol carbon source. For instance, the tensile strength of carbon nanotube fiber is increased by more than 1 time (750 MPa). The carbon nanotube fiber has good flexibility and can shows stable mechanical properties after millions of bending cycles. The conductivity is increased by more than 4 times (4.8x10(3) S/cm), which can effectively meet the application requirements of fiber energy-storing devices. The application of carbon nanotube fibers in a fiber-shaped lithium-carbon dioxide battery is demonstrated with good electrochemical performance.

Electrospinning of continuous carbon nanotube‐filled nanofiber yarns

Process, Structure, and Properties of Electrospun Carbon Nanotube-Reinforced Nanocomposite Yarns

Spinning continuous carbon nanotube yarns

Continuous spinning of a single-walled carbon nanotube-nylon composite fiber

Spinning and Processing Continuous Yarns from 4‐inch Wafer Scale Super‐Aligned Carbon Nanotube Arrays

Wet Twisting in Spinning for Rapid and Cost‐Effective Fabrication of Superior Carbon Nanotube Yarns

Continuous and Scalable Fabrication and Multifunctional Properties of Carbon Nanotube Aerogels from the Floating Catalyst Method

Mechanical properties of continuously spun fibers of carbon nanotubes

Carbon nanotube yarns with high tensile strength made by a twisting and shrinking method.

Wet-spinning of carbon nanotube fibers: dispersion, processing and properties

Epitaxial Growth of Aligned and Continuous Carbon Nanofibers from Carbon Nanotubes.

Electrospinning:From Randomly Oriented Nanofiber Mats to Aligned Continuous Yarns

Fabrication and Characterization of Single-Walled Carbon Nanotube Fiber for Electronics Applications

Fabrication of nanofiber yarns via electro-blown and hang-fiber process

Fabrication of Microscale Carbon Nanotube Fibers

High-Strength and Conductive Electrospun Nanofiber Yarns

Continuous Preparation of High-performing Carbon Nanotube Fibers Based on Cycloalkane/ethanol Mixing Carbon Source

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Strong and multi-responsive composite coiled yarn based on electrospun polyamide-6 nanofiber and carbon nanotube

Core-spun Carbon Nanotube Yarn Supercapacitors for Wearable Electronic Textiles.

Conjugate Electrospinning of Continuous Nanofiber Yarn of Poly(L-Lactide)/Nanotricalcium Phosphate Nanocomposite