Abstract:This study presents a novel synthesis route for high-entropy alloys (HEAs) and high-entropy metallic glass (HEMG) using radio frequency (RF) magnetron sputtering and controlling the HEA phase selection according to atomic size difference (δ) and film thickness. The preparation of HEAs using sputtering requires either multitargets or the preparation of a target containing at least five distinct elements. In developing HEA-preparation techniques, the emergence of a novel sputtering target system is promising to prepare a wide range of HEAs. A new HEA-preparation technique is developed to avoid multitargets and configure the target elements with the required components in a single target system. Because of a customizable target facility, initially, a TiZrNbMoTaCr target emerged with an amorphous phase owing to a high δ value of 7.6, which was followed by a solid solution (SS) by lowering the δ value to 5 (≤6.6). Thus, this system was tested for the first time to prepare TiZrNbMoTa HEA and TiZrNbMoTa HEMG via RF magnetron sputtering. Both films were analyzed using X-ray diffraction (XRD), X-ray photoelectron spectroscopy, field emission scanning electron microscopy cross-sectional thickness, and atomic force microscopy (AFM). Furthermore, HEMG showed higher hardness 10.3 (±0.17) GPa, modulus 186 (±7) GPa, elastic deformation (0.055) and plastic deformation (0.032 GPa), smooth surface, lower corrosion current density (Icorr), and robust cell viability compared to CP-Ti and HEA. XRD analysis of the film showed SS with a body-centered cubic (BCC) structure with (110) as the preferred orientation. The valence electron concentration [VEC = 4.8 (<6.87)] also confirmed the BCC structure. Furthermore, the morphology of the thin film was analyzed through AFM, revealing a smooth surface for HEMG. Inclusively, the concept of configurational entropy (ΔSmix) is applied and the crystalline phase is achieved at room temperature, optimizing the processing by avoiding further furnace usage.

Pt-induced atomic-level tailoring towards paracrystalline high-entropy alloy

Ultrahigh Cryogenic Strength and Exceptional Ductility in Ultrafine-Grained CoCrFeMnNi High-Entropy Alloy with Fully Recrystallized Structure

Hexagonal Closed-Packed Precipitation Enhancement in a NbTiHfZr Refractory High-Entropy Alloy

Parametric Study of Amorphous High-Entropy Alloys formation from two New Perspectives: Atomic Radius Modification and Crystalline Structure of Alloying Elements

Enhancing the Strength of AlCrFeNi HEAs Via Tailoring Aluminum Content and Optimal Aging Treatment

Magnetron co-sputtering synthesis and nanoindentation studies of nanocrystalline (TiZrHf)x(NbTa)1−x high-entropy alloy thin films

Unveiling the atomic-scale origins of high damage tolerance of single-crystal high entropy alloys

A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength

Lattice Distortion in a Strong and Ductile Refractory High-Entropy Alloy

Tailoring Local Chemical Ordering via Elemental Tuning in High-Entropy Alloys

Alloy Design and Properties Optimization of High-Entropy Alloys

Synthesis of High-Entropy Alloys with a Tailored Composition and Phase Structure Using a Single Configurable Target

High-content ductile coherent nanoprecipitates achieve ultrastrong high-entropy alloys

Phase stability, local chemical disorder and its effect on the mechanical properties of refractory high-entropy alloys

Concurrent Recrystallization and Precipitation for Combination of Superior Precipitation and Grain Boundary Hardening in Co37Cr20Ni37Ti3Al3 High-Entropy Alloy

Atomic Deformation Mechanism and Interface Toughening in Metastable High Entropy Alloy

Microstructure of and mechanical properties of an as-cast fine-grain dual-phase Fe-based high entropy alloy formed via solid-state phase transformation

Design and Development of High-Entropy Alloys with a Tailored Composition and Phase Structure Based on Thermodynamic Parameters and Film Thickness Using a Novel Combinatorial Target

Uniting superior mechanical properties with oxidation resistance in a refractory high-entropy alloy via Cr and Al alloying

Phase transformation and strengthening mechanisms of nanostructured high-entropy alloys

Accelerated Discovery of (TiZrHf)x(NbTa)1‐x High‐Entropy Alloys with Superior Thermal Stability and a New Crystallization Mechanism