Abstract:In this study, a magnetic flux leakage (MFL) method, known to be a suitable non-destructive evaluation (NDE) method for continuum ferromagnetic structures, was used to detect local damage when inspecting steel wire ropes. To demonstrate the proposed damage detection method through experiments, a multi-channel MFL sensor head was fabricated using a Hall sensor array and magnetic yokes to adapt to the wire rope. To prepare the damaged wire-rope specimens, several different amounts of artificial damages were inflicted on wire ropes. The MFL sensor head was used to scan the damaged specimens to measure the magnetic flux signals. After obtaining the signals, a series of signal processing steps, including the enveloping process based on the Hilbert transform (HT), was performed to better recognize the MFL signals by reducing the unexpected noise. The enveloped signals were then analyzed for objective damage detection by comparing them with a threshold that was established based on the generalized extreme value (GEV) distribution. The detected MFL signals that exceed the threshold were analyzed quantitatively by extracting the magnetic features from the MFL signals. To improve the quantitative analysis, damage indexes based on the relationship between the enveloped MFL signal and the threshold value were also utilized, along with a general damage index for the MFL method. The detected MFL signals for each damage type were quantified by using the proposed damage indexes and the general damage indexes for the MFL method. Finally, an artificial neural network (ANN) based multi-stage pattern recognition method using extracted multi-scale damage indexes was implemented to automatically estimate the severity of the damage. To analyze the reliability of the MFL-based automated wire rope NDE method, the accuracy and reliability were evaluated by comparing the repeatedly estimated damage size and the actual damage size.

Design of magnetic flux leakage detector for mine wire rope

Multi-loop magnetisation method for detecting coal mine wire rope defects

Detecting and Locating Local Flaws Based on Magnetic Flux Leakage Imaging for Wire Ropes

A Sensor for Broken Wire Detection of Steel Wire Ropes Based on the Magnetic Concentrating Principle

Online magnetic flux leakage testing method and system for wire ropes of multi-rope friction hoist

Extraction of weak signal based on wire rope detection in timing belt of wind turbines

Simulation analysis and experimental investigation of wire rope leakage magnetic field detection

Magnetic Flux Leakage Testing of Wire Rope Defects with Denoising

Nondestructive Testing for Shallow Defect of Ferromagnetic Objects Based on Magnetic Probe Structure

Structure and Character Analysis of a New Type of Steel Wire Rope NDT Detector Apparatus

Fault Diagnosis of Steel Wire Ropes Based on Magnetic Flux Leakage Imaging Under Strong Shaking and Strand Noises

Enhancing Wire-Rope Damage Signals Based on a Radial Magnetic Concentrator Bridge Circuit

Online Nondestructive Testing for Fine Steel Wire Rope in Electromagnetic Interference Environment

Magnetic Flux Leakage Sensing and Artificial Neural Network Pattern Recognition-Based Automated Damage Detection and Quantification for Wire Rope Non-Destructive Evaluation

Quantitative Method for Defect Surface Area of Wire Rope Based on Circumferential Magnetic Flux Leakage Image

A New Anti-shaking PCB Module for the Steel Wire Rope Flaw Inspection

Nondestructive Detection of Wire Rope Damage Using Leakage Magnetic Technique based on Dual-Layer Sensors

Wire Rope Damage Detection Based on Magnetic Leakage and Visible Light

Research on the force-magnetic coupling of steel wire and defect evaluation based on self-magnetic flux leakage effect

Wire Rope Defects with the Micro-magnetic NDT Technology

Eliminating Shaking Noise for Defect Detection of Steel Wire Ropes Based on Magnetic Flux Leakage Signals