Abstract:Tensile strength and fracture toughness are two essential material parameters for the study of concrete fracture. The experimental procedures to measure these two fracture parameters might be complicated due to their dependence on the specimen size or test method. Alternatively, based on the fracture test results only, size and boundary effect models can determine both parameters simultaneously. In this study, different versions of boundary effect models developed by Hu et al. were summarized, and a modified Hu-Guan’s boundary effect model with a more appropriate equivalent crack length definition is proposed. The proposed model can correctly combine the contributions of material strength and linear elastic fracture mechanics on the failure of concrete material with any maximum aggregate size. Another size and boundary model developed based on the local energy concept is also introduced, and its capability to predict the fracture parameters from the fracture test results of wedge-splitting and compact tension specimens is first validated. In addition, the classical Bažant’s Type 2 size effect law is transformed to its boundary effect shape with the same equivalent crack length as Koval-Gao’s size and boundary effect model. This improvement could extend the applicability of the model to infer the material parameters from the test results of different types of specimens, including the geometrically similar specimens with constant crack-length-to-height ratios and specimens with different initial crack-length-to-height ratios. The test results of different types of specimens are adopted to verify the applicability of different size and boundary effect models for the determination of fracture toughness and tensile strength of concrete material. The quality of the extrapolated fracture parameters of the different models are compared and discussed in detail, and the corresponding recommendations for predicting the fracture parameters for dam concrete are proposed.

Batch design of cementitious composites for the double-K fracture model

Stochastic Fracture of Concrete Composites: A Mesoscale Methodology

Hybrid Phase-Field Modeling of Mesoscopic Failure in Concrete Combined with Fourier-Voronoi Stochastic Aggregate Distribution Modelling Approach

Cohesive Cracking Simulation of Concrete Using Effective Modulus

A Mesoscale Modelling Approach Coupling SBFEM, Continuous Damage Phase-Field Model and Discrete Cohesive Crack Model for Concrete Fracture

Fracture Toughness And Microstructure Of Concrete At Early-Ages

Fracture Mechanisms of Polymer Cement Mortar: Concrete Interfaces

3 D In-situ XCT Image Based Mesoscale Fracture Modelling and Validation of Concrete Using Voxel Hexahedron Meshing and Damage Plasticity Model

Effect of Size and Cohesive Assumptions on the Double-K Fracture Parameters of Concrete

Experimental measurement of double-K fracture parameters of concrete with small-size aggregates

Determination of the fracture parameters of the Double-K model using weight functions of split-tension specimens

Mesoscopic Model for the Fracture of Polymethyl Methacrylate Bone Cement

Microscale Testing and Modelling of Cement Paste as Basis for Multi-Scale Modelling

Fracture Toughness of Ordinary Plain Concrete Under Three-Point Bending Based on Double-K and Boundary Effect Fracture Models

Quantitative characterization and mechanism analysis on thickness-dependent size effect of concrete fracture

Design of Concrete Fracture Property by Average Aggregate Size

Determination of Fracture Properties of Concrete Using Size and Boundary Effect Models

Experimental Study on Fracture Properties of Cementitious Materials

Improvement of boundary effect model in multi-scale hybrid fibers reinforced cementitious composite and prediction of its structural failure behavior

Effects of Specimen Size and Crack Depth Ratio on Double-K Fracture Model Parameters of Roller Compacted Concrete