Experimental investigation for vapor compression system performance enhancement through condenser cooling by using shallow fluidized bed

Ayad S. Abedalh,Asmaa Taha Hussein,Anwar Ahmed Yousif

DOI: https://doi.org/10.1007/s10973-023-12495-5

IF: 4.755

2023-09-11

Journal of Thermal Analysis and Calorimetry

Abstract:A vapor compression cycle is a mechanical heat transfer device that moves heat from a lower-temperature sink to a higher-temperature sink. In vapor compression refrigeration, the condenser can remove heat from the system when it is hot and this heat can be rejected by air or water. The present work concentrates on an investigation that has been carried out experimentally of performance enhancement of a compression cycle with a shallow fluidized bed utilized to cool the condenser. The homogeneous particle size (0.5 mm) in the shallow fluidized bed helps to remove heat generated by the condenser; in order to guarantee adequate particle mixing, the surface of the bed kept approximately 2.5 cm high. The result shows that amount of coefficient of performance and power consumption of the compressor improvement ranges about 49.3 and 18.53%, respectively, by using the shallow fluidized bed for the condenser compared without condenser's shallow fluidized bed. Additionally, the condenser with a shallow fluidized bed obtained the best COP at an temperature of the evaporator of 8 °C, with an estimated value of 3.217. Moreover, when utilizing a shallow fluidized bed, the heat rejection ratio values reduced by about 35.7% when compared to the range of (H.R.R.) without a shallow fluidized bed. It is also observed that the amount of refrigerating effect values will improve when the condenser is immersed in the shallow fluidized bed ranges about 18.53% at times 60 min., compared without shallow fluidized bed for the condenser.

chemistry, physical, analytical,thermodynamics