Abstract:Field test results show that about 15% to 40% of building heat loss in China is attributable to poor heating systems regulation. The current method for addressing this problem is to install thermostatic radiator valves (TRVs) to the ends of radiators, a method adapted from northern Europe. However, this method has resulted in poor performance from delayed controlling action due to thermal inertia as well as insufficient system control accuracy. This is further compounded by incorrect operation by system users and a lack of financial incentives to regulate the system if users are not billed for their heat consumption. We present a new method for simultaneously heat controlling and metering. The core challenge is to design a control strategy that will maintain the room’s temperature. Thus, we established dynamic heat transfer models for water flow, the radiator and the building so as to obtain the optimal heating strategy. We also simulated the indoor thermal dynamic performance of the heating system with different heating loads, supply water temperatures, and supply water flow rates using three methods: a continuously changing flow rate (Method 1), a step-change flow rate based on temperature deviation (Method 2) and an intelligent step-change flow rate (Method 3) which predicts the duty cycle of the valve in the proceeding period and controls the valve’s on-time. The simulation results indicate the performance of these three methods. For Method 1, as the room temperature is above the set point, the flow rate can be automatically reduced to a level which is proportional to the room temperature deviation. Further, the scale factor of the flow rate is designed according to the +2°C deviation, so it is accepted that the room temperature is higher than the set point by +2°C using this method. However, this low control precision is unsatisfactory. The mean temperature is higher than the set point and greatly affected by the heating load and supply water’s temperature and flow rate. For Method 2, the controlling action is delayed by thermal inertia, the room temperature fluctuates between the highest and lowest levels, and the temperature deviation can be greater than the set value. For Method 3, both the simulation and field test results showed that room temperature deviation was maintained within a ±0.5°C range under the various conditions. This method appears relatively robust and adaptable, and was the best control strategy of the three methods.

Parameter identification framework of thermal network model for ventilated heating floor

Dynamic Modeling of Integrated Energy Cooling and Heating Supply System Based on System Identification

Development and validation of a second-order thermal network model for residential buildings

Low-order gray-box modeling of heating buildings and the progressive dimension reduction identification of uncertain model parameters

Preheating time estimation in intermittent heating with hot-water radiators by considering model uncertainties

Network Parameter Estimation For District Heating System

A novel temperature prediction method in complex indoor environments based on parameter estimation

Characterization Of District Heating Energy Use Of A Typical Residential Building In North China

Theoretical Model of Buoyancy-Driven Air Infiltration During Heating/cooling Seasons in Large Space Buildings

Simulation and optimization of the key parameters of combined floor and Kang heating terminal based on differentiated thermal demands

An integrated modeling tool to simulating effect of natural ventilation on indoor air quality and room thermal conditions

Dynamic Temperature Model of District Heating System Based on Operation Data

Modeling and Measurement Study on an Intermittent Heating System of a Residence in Cambridgeshire

MODELING AND SIMULATION OF UNDERFLOOR ELECTRIC HEATING SYSTEM WITH LATENT THERMAL STORAGE AND AIR SUPPLY

Evaluation of the controllability of multi-family building with radiator heating systems: A frequency domain approach

Nonlinear Dynamic Models with Uncertainties Measured by Fuzzy Sets for Radiator-Heated Buildings

Construction of greenhouse environment temperature adaptive model based on parameter identification

Numerical Simulation of Heat Transfer Characteristics of Capillary Radiant Heating Floor

Thermal circuits assembling and state-space extraction for modelling heat transfer in buildings

A novel on-off TRV adjustment model and simulation of its thermal dynamic performance

Development of dynamic simplified thermal models of active pipe-embedded building envelopes using genetic algorithm