Abstract:Reducing the heat dissipation through the envelope is critical for heating energy savings in buildings . Double-layer pipe-embedded external wall (DPEW) has the advantage of load interception and low-temperature heating, and is a promising solution to reducing energy demand for heating. To gain a comprehensive understanding of the thermal performance of DPEW, a thermal network model is established in this study, which characterizes the steady heat transfer process of DPEW by the superposition of water temperature, outdoor temperature and indoor temperature. The accuracy of the proposed model is validated against experiment data in the literature. Evaluation indexes including equivalent overall heat transfer coefficient (U-value), equivalent outdoor temperature, and energy utilization rate of outer pipe or/and inner pipe are proposed based on the thermal network model of DPEW. A case study is conducted under typical winter conditions of Beijing to investigate the influence of water temperature and outdoor temperature on the thermal performance of DPEW. The results show that the energy utilization rate of DPEW increases with the increasing outdoor temperature and inner pipe water temperature, and the decreasing outer pipe water temperature, while the energy utilization rates of the outer pipe and inner pipe remain largely unaffected. At the outdoor temperature of −9 °C, the outer pipe water temperature of 10 °C and the inner pipe water temperature of 25 °C, the energy utilization rates of the outer pipe, inner pipe, and DPEW reach approximately 27 %, 89 % and 65 %, respectively. This study gives an insight into the steady-state thermal performance of DPEW, and provides guidance for its further research and application.

Development of dynamic simplified thermal models of active pipe-embedded building envelopes using genetic algorithm

A semi-dynamic model of active pipe-embedded building envelope for thermal performance evaluation

Experimental validation of a semi-dynamic simplified model of active pipe-embedded building envelope

Dynamic Modeling of Integrated Energy Cooling and Heating Supply System Based on System Identification

Dynamic thermal performance of pipe-embedded building envelope utilizing evaporative cooling water in the cooling season

An active pipe-embedded building envelope for utilizing low-grade energy sources

A parametric model on thermal evaluation of building envelopes containing phase change material

A simple parameter configuration scheme for a simplified dynamic model of pipe-embedded wall

Energy Planning-oriented Simplified Models of Envelope Dynamic Load Prediction for Individual Buildings

A Dynamic State-Space Model for Predicting the Thermal Performance of Ventilated Electric Heating Mortar Blocks Integrated with Phase Change Material

A State-Space Based Method to Predict Thermal Performance of Pipeembedded Double Skin Façade: Case Study in Guangzhou

A simplified method for the thermal performance analysis of double-layer pipe-embedded external wall

Healthy , Intelligent and Resilient Buildings and Urban Environments

Development and validation of a second-order thermal network model for residential buildings

Active pipe-embedded structures in buildings for utilizing low-grade energy sources: A review

A Two-Step Identification Framework for Building Thermal Dynamic Based on High Fluctuation Performance Data: A Case of Office with Variable Refrigerant Flow System

Predicting method for annual dynamic performance of pipe-embedded windows

A response factor method to quantify the dynamic performance for pipe-embedded radiant systems

An Online Learning Framework for Self-Adaptive Dynamic Thermal Modeling of Building Envelopes

Effectiveness of the thermal mass of external walls on residential buildings for part-time part-space heating and cooling using the state-space method

A new approach to compute heat transfer of ground-coupled envelope in building thermal simulation software