Abstract:The graphical shows the synergistic effect of SWCNT/GO hybrid filler in enhancing mechanical and thermal stabilization property of PAN. The presence of polar functional groups of GO improved dispersion efficiency of SWCNT which resulted in high tensile strength. While presence of GO caused early oxidation which improved thermal stability and carbon yield of PAN. This study reports how hybrid nano‐filler can enhance the tensile strength, electrical properties and thermal stabilization of PAN (polyacrylonitrile) nanocomposite films. The nano‐fillers used are graphene oxide (GO), single‐wall carbon nanotubes (SWCNT), and a hybrid of both. The combination of both nano‐fillers was made by dispersing GO in DMAc (dimethyl acetamide) and then adding SWCNT to the solution. The solution was mixed well using ultrasonication and high‐speed stirring. 1 wt% amount of nano‐filler solutions was added to PAN liquid to make PAN nanocomposite films. The films were tested for mechanical properties, electrical resistivity, thermoxidative stabilization, and thermal stability. The results showed that adding nano‐fillers to PAN significantly improved its tensile strength. GO increased the tensile strength by 42.9% (38.3 MPa), while SWCNT increased it by 57.3% (42.15 MPa). The combination of both (0.5 wt% SWCNT + 0.5 wt% GO) had a remarkable effect, increasing the tensile strength by 96% (52.53 MPa). This was because the combination of both prevented SWCNT from agglomerating together and made it interact better with the PAN, forming a complete network. The combination of both also made the PAN oxidize and stabilize early and efficiently during heating, which made its residual weight increase by ~5.5% more than pristine PAN in TGA. The electrical resistivity and SEM micrograph data correlate with the thermal analysis data, showing that PCG (1 wt% combination) reached the percolation threshold because of the benefits of both GO and SWCNT. The combination of both also showed 95.6% synergy in tensile strength compared to individual nano‐fillers, indicating its potential for efficient reinforcement. Highlights Hybrid filler boosts PAN strength from 26.8 to 52.53 MPa, surpassing PC, PG. TGA: ~5.5 wt% increased residual weight in 1 wt% hybrid‐reinforced PCG composites. Hybrid undergoes GO decomposition, early oxidation and improved stabilization. PCG composite: Enhanced oxidation, improved stabilization via SWCNT network. PC & PCG composites show low volumetric resistivity due to SWCNT network.

Synergistic effect of single wall carbon nanotubes/graphene oxide hybrid nano‐filler on thermal stabilization and tensile strength of polyacrylonitrile copolymer

Oxygenated moiety enhanced thermal stabilization, mechanical, and thermomechanical performance of polyacrylonitrile/single wall carbon nanotubes films

Synergistic Effects of Cnt and Go on Enhancing Mechanical Properties and Separation Performance of Polyelectrolyte Complex Membranes

Effect of Modified Nanographene Oxide (mGO)/Carbon Nanotubes (CNTs) Hybrid Filler on the Cure, Mechanical and Swelling Properties of Silicone Rubber Composites

Highly Conductive Graphene Oxide/polyaniline Hybrid Polymer Nanocomposites with Simultaneously Improved Mechanical Properties

Enhancing Crystallinity and Orientation by Hot-Stretching to Improve the Mechanical Properties of Electrospun Partially Aligned Polyacrylonitrile (PAN) Nanocomposites

A comparison of physical, morphological, and mechanical properties of bio‐polyester hybrid nanocomposites

Studies on (polytrimethylene terephthalate)/graphene oxide/f-MWCNT hybrid nanocomposites

In Situ Polymerization Preparation and Mechanical Properties of Nanocomposites Based on PA10T/10I-block-PEG Copolymer and Graphene Oxide

Free-Standing Graphene Oxide and Carbon Nanotube Hybrid Papers with Enhanced Electrical and Mechanical Performance and Their Synergy in Polymer Laminates

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

Enhancement in mechanical properties of polyamide 66-carbon fiber composites containing graphene oxide-carbon nanotube hybrid nanofillers synthesized through in situ interfacial polymerization

Temperature-Dependent Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets on the Tensile Quasi-Static and Fatigue Properties of Epoxy Nanocomposites

Striking multiple synergies created by combining reduced graphene oxides and carbon nanotubes for polymer nanocomposites

The Effect of Hexamethylene Diisocyanate-Modified Graphene Oxide as a Nanofiller Material on the Properties of Conductive Polyaniline

Enhancement in mechanical properties of GFRP‐coal‐derived graphene oxide composites by addition of multiwalled carbon nanotubes and halloysite nanotubes: A comparative study

Largely Enhanced Thermal and Mechanical Properties of Polymer Nanocomposites Via Incorporating C60@graphene Nanocarbon Hybrid

Electrical Conductivity and Interlaminar Shear Strength Enhancement of Carbon Fiber Reinforced Polymers Through Synergetic Effect Between Graphene Oxide and Polyaniline

Improved Strength and Toughness of Semi-Aromatic Polyamide 6T-Co-6(pa6t/6)/go Composites Via in Situ Polymerization

Graphene-embedded electrospun polyacrylonitrile nanofibers with enhanced thermo-mechanical properties

Synergistically Improving the Thermal Conductivity and Mechanical Strength of PEEK/MWCNT Nanocomposites by Functionalizing the Matrix with Fluorene Groups