Abstract:The graphical shows the synergistic effect of SWCNT/GO hybrid filler in enhancing mechanical and thermal stabilization property of PAN. The presence of polar functional groups of GO improved dispersion efficiency of SWCNT which resulted in high tensile strength. While presence of GO caused early oxidation which improved thermal stability and carbon yield of PAN. This study reports how hybrid nano‐filler can enhance the tensile strength, electrical properties and thermal stabilization of PAN (polyacrylonitrile) nanocomposite films. The nano‐fillers used are graphene oxide (GO), single‐wall carbon nanotubes (SWCNT), and a hybrid of both. The combination of both nano‐fillers was made by dispersing GO in DMAc (dimethyl acetamide) and then adding SWCNT to the solution. The solution was mixed well using ultrasonication and high‐speed stirring. 1 wt% amount of nano‐filler solutions was added to PAN liquid to make PAN nanocomposite films. The films were tested for mechanical properties, electrical resistivity, thermoxidative stabilization, and thermal stability. The results showed that adding nano‐fillers to PAN significantly improved its tensile strength. GO increased the tensile strength by 42.9% (38.3 MPa), while SWCNT increased it by 57.3% (42.15 MPa). The combination of both (0.5 wt% SWCNT + 0.5 wt% GO) had a remarkable effect, increasing the tensile strength by 96% (52.53 MPa). This was because the combination of both prevented SWCNT from agglomerating together and made it interact better with the PAN, forming a complete network. The combination of both also made the PAN oxidize and stabilize early and efficiently during heating, which made its residual weight increase by ~5.5% more than pristine PAN in TGA. The electrical resistivity and SEM micrograph data correlate with the thermal analysis data, showing that PCG (1 wt% combination) reached the percolation threshold because of the benefits of both GO and SWCNT. The combination of both also showed 95.6% synergy in tensile strength compared to individual nano‐fillers, indicating its potential for efficient reinforcement. Highlights Hybrid filler boosts PAN strength from 26.8 to 52.53 MPa, surpassing PC, PG. TGA: ~5.5 wt% increased residual weight in 1 wt% hybrid‐reinforced PCG composites. Hybrid undergoes GO decomposition, early oxidation and improved stabilization. PCG composite: Enhanced oxidation, improved stabilization via SWCNT network. PC & PCG composites show low volumetric resistivity due to SWCNT network.

Synergistic Effects of Cnt and Go on Enhancing Mechanical Properties and Separation Performance of Polyelectrolyte Complex Membranes

Fabrication and performance of a new type of charged nanofiltration membrane based on polyelectrolyte complex

“Mix-Then-On-Demand-Complex”: In Situ Cascade Anionization and Complexation of Graphene Oxide for High-Performance Nanofiltration Membranes

Synergistic Strengthening of Polyelectrolyte Complex Membranes by Functionalized Carbon Nanotubes and Metal Ions.

Novel Nanocomposite Of Poly(Acrylonitrile-Co-Glycidyl Methacrylate) Crosslinked With Jeffamine-Functionalized Multiwalled Carbon Nanotubes As Gel Polymer Electrolytes

Preparation and properties of PEC nanocomposite membranes with carboxymethyl cellulose and modified silica

A Novel Method for Fabricating Polyelectrolyte Complex/inorganic Nanohybrid Membranes with High Isopropanol Dehydration Performance

Poly( p -phenylene benzobisoxazole) Fiber/Epoxy Composites Reinforced with Carbon Nanotubes and Graphene Oxide for Enhanced Interfacial Adhesion and Mechanical Strength

Preparation of GO@DCN nanocomposite modified PVDF membranes for improved membrane performance and exploration of formation mechanism

Poly(p-phenylene terephthalamide)/carbon nanotube composite membrane: Preparation via polyanion solution method and mechanical property enhancement

Effective enhancement of gas separation performance in mixed matrix membranes using core/shell structured multi-walled carbon nanotube/graphene oxide nanoribbons

Studies on structures and ultrahigh permeability of novel polyelectrolyte complex membranes.

Synthesis and Characterization of Solution-Processable Polyelectrolyte Complexes and Their Homogeneous Membranes

Effects of multi-walled carbon nanotube/graphene oxide-based sizing on interfacial and tribological properties of continuous carbon fiber/poly(ether ether ketone) composites

Mixed Dye Removal Efficiency of Electrospun Polyacrylonitrile–Graphene Oxide Composite Membranes

Magnetic Field-Assisted Alignment of Graphene Oxide Nanosheets in a Polymer Matrix to Enhance Ionic Conduction

Synergistic effect of single wall carbon nanotubes/graphene oxide hybrid nano‐filler on thermal stabilization and tensile strength of polyacrylonitrile copolymer

Non-covalent Cross-linking to Boost the Stability and Permeability of Graphene-oxide-based Membranes

Free-Standing Graphene Oxide and Carbon Nanotube Hybrid Papers with Enhanced Electrical and Mechanical Performance and Their Synergy in Polymer Laminates

Sulfonated Poly(arylene ether nitrile)-Based Composite Membranes Enhanced with Ca2+ Bridged Carbon Nanotube-Graphene Oxide Networks

Nanocomposite Membrane with Polyethylenimine-grafted Graphene Oxide as a Novel Additive to Enhance Pollutant Filtration Performance.