Abstract:The biomedical sector requires the use of composite materials whose properties can replace those of defective organs, especially bones, of which the Hydroxyapatite structure is the main component of bones and teeth. Herein, we report successful elaboration of new Mg-rich sulfato-calcium hydroxyapatite (SCHA) coating by cathodic electrodeposition on an anodized Ti6Al4V alloy substrate under bias voltages of 10, 20 and 30 V. The resulting deposits were well identified by numerous characterization techniques, such as X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy and scanning electron microscopy (SEM). Anodizing the Ti-based substrate under a bias voltage of 20 V produces TiO 2 layers with ordered nanotube arrays of approximately (80-100 nm), which are completely damaged at 30 V, leading to an irregular porous structure. The deposits made at 10 and 20 V present cracks, unlike that made at 30 V which is more uniform and less rough. XRD analysis reveals both an amorphous structure for the latter and the existence of a crystalline to amorphous conversion as a function of the anodization voltage for the apatite deposition. Electrochemical tests performed in Hank's simulated body fluid (HSBF) confirm the formation of the apatite deposit which implies a chemical surface modification and reveal interesting anticorrosion properties for the apatite-coated samples, with the highest polarization resistance recorded for that treated at 20 V, with a corrosion current density ( i corr ) of 4.25 μA/cm 2 and a polarization resistance ( R p) of 4.60 kΩ cm 2 . The results obtained confirm both the nature and the structure of the produced deposits (TiO 2 layers and Mg-SCHA/TiO 2 ). Electrochemical tests performed in Hank's simulated body fluid (HSBF) reveal interesting anticorrosion properties for coated and anodized samples, compared to those uncoated, with the highest corrosion resistance recorded for the anodized sample at 10 V. This suggests that the biocompatible Mg-rich SCHAs deposit, elaborated by simple chemical route from biological waste could be suitable for biomedical purposes.

Corrosion resistance studies of copper and magnesium-doped fluorohydroxyapatite coatings on titanium biomaterial

Electrolytic Deposition of Magnesium-Substituted Hydroxyapatite Crystals on Titanium Substrate

Biological and Biomechanical Behavior of Titanium Implants with Fluoridated Hydroxyapatite Coatings

Effect of Electrodeposition Modes on Surface Characteristics and Corrosion Properties of Fluorine-Doped Hydroxyapatite Coatings on Mg–Zn–Ca Alloy

Study of Mg-Rich Sulfato-Calcium Hydroxyapatite Coating on Anodized Ti6Al4V-Alloy for Biomedical Applications

Effects of Copper Doping on Fluorohydroxyapatite Coating: Analysis of Microstructure, Biocompatibility, Corrosion Resistance, and Cell Adhesion Characteristics

Improvement of bioactivity with magnesium and fluorine ions incorporated hydroxyapatite coatings via sol–gel deposition on Ti6Al4V alloys

In vitro corrosion and cytocompatibility of Mg-Zn-Ca alloys coated with FHA

Investigation of structure, morphology, and corrosion behavior of carboxylic acids/hydroxyapatite/chitosan coatings on Ti disks for implants

Electrodeposition of F-doped Hydroxyapatite-Tio2 Coating on AZ31 Magnesium Alloy for Enhancing Corrosion Protection and Biocompatibility

Preparation and Characterization of Manganese and Fluorine Co-Modified Hydroxyapatite Composite Coating

Ag-Incorporated FHA Coating on Pure Mg: Degradation and in Vitro Antibacterial Properties

Novel Fluoridated Hydroxyapatite/mao Composite Coating on AZ31B Magnesium Alloy for Biomedical Application

In vitro study of electrodeposited fluoridated hydroxyapatite coating on G-II titanium with a nanostructured TiO2 interlayer

Characterization, mechanical properties, corrosion behaviour and bone-like apatite formation ability of fluorine substituted hydroxyapatite coating

Magnesium and Fluoride Doped Hydroxyapatite Coatings Grown by Pulsed Laser Deposition for Promoting Titanium Implant Cytocompatibility

Investigating the Concurrent Effect of Cerium/Hydroxyapatite Coatings on Mg-Based Implant for Enhancing Corrosion Performance and In-Vitro Activity

Osteoinduction Evaluation of Fluorinated Hydroxyapatite and Tantalum Composite Coatings on Magnesium Alloys

Interfacial Study of Magnesium-Containing Fluoridated Hydroxyapatite Coatings

Improvements of Corrosion Resistance and Antibacterial Properties of Hydroxyapatite/Cupric Oxide Doped Titania Composite Coatings on Degradable Magnesium Alloys.

Electrochemical Behaviour and Cytocompatibility of Nano-Fluoridated Apatite Coating on Biodegradable Magnesium Alloy by Simple Chemical Conversion