Abstract:Recently tetrapod piled jacket (TPJ) foundations are considered as a promising solution for offshore wind turbines in waters with depths ranging from 20 m to 50 m. This paper presents a numerical study into the monotonic lateral loading behaviour of TPJ foundations in medium sand, in terms of overall load-displacement responses of TPJ foundations and internal force within individual corner piles as well as pile-soil interaction. The results of previous centrifuge model tests are used to provide high-quality verification for the development of a 3D finite element model established by ABAQUS. A series of parametric studies is then carried out to look into more detailed response of TPJ foundations subjected to lateral loads, including the influence of spacing and slenderness ratio of piles, loading height as well as soil friction angle. The numerical results show that there are two various deformation models of TPJ foundations during lateral loading. One is shearing dominated deformation model under smaller loads, while another one is overturning dominated model under larger loads. Moreover, the lateral soil-pile interaction is found to be greatly influenced by enhancing/weakening effects of the axial forces of individual piles. The cause of this phenomenon is primarily due to the change in soil stress induced by pile vertical movement and radial deformation. To quantify this effect on pile-soil interaction of TPJ foundation, an enhancement factor Gamma(s), defined as the ratio of the soil resistance on downwind piles to that on upwind piles, is proposed. Consequently, the relationship between Gamma(s), depth of influence zone z(c )and four parameters are carefully investigated. For simplicity, the Gamma(s) is assumed constant and independent with pile lateral deflection as well as soil depths, based on which the values for Gamma(s) and z(c) are recommended for practical design uses. It is highlighted in the present study that these values should be chosen based on the specific loading conditions to provide much safer and more robust design for TPJ foundations.

Model Investigation on Spudcan-Sand Interaction Using Transparent Media

MPM Modeling of Pile Installation in Sand: Contact Improvement and Quantitative Analysis

Large-Deformation Finite-Element Simulation of Deformation and Strain Fields Resulting from Closed-End Displacement Pile Installation in Sand

Large Deformation Analysis of Intermittent Pile Penetration into Dense Sand Incorporating a State Dependent Mohr–Coulomb Model

DEM Study of the Stress Fields Around the Closed-Ended Displacement Pile Driven in Sand

Stresses Developed Around Displacement Piles Penetration in Sand

Large Deformation Finite-Element Simulation of Displacement-Pile Installation Experiments in Sand

Model tests on displacement field of internal soil induced by laterally loading pile

Theoretical Breakage Mechanics and Experimental Assessment of Stresses Surrounding Piles Penetrating into Dense Silica Sand

Effect of Loading Rate on Lateral Pile-Soil Interaction in Sand Considering Partially Drained Condition

Numerical Investigation on the Lateral Loading Behaviour of Tetrapod Piled Jacket Foundations in Medium Dense Sand

Research on the Influence of Spudcan Penetration and Extraction on Adjacent Platform Piles in Sand

Experimental Study on the Development of Surrounding Soil Stress During XCC Pile Installation in Sand

Numerical modelling of sand plug formation during punch-through of a spudcan footing

Investigation of Deflection of a Laterally Loaded Pile and Soil Deformation Using the PIV Technique

Influence of the Penetration of Adjacent X-section Cast-in-place Concrete (XCC) Pile on the Existing XCC Pile in Sand

Simulation-Based Analysis Of Spudcan Interaction With Soil

Analysis of Soil Movement Around a Loaded Pile Induced by Deep Excavation

Undrained Bearing Capacity of Spudcan under Combined Loading

Method Evaluating Axial Response of Vertically-Loaded Piles During Spudcan Penetration

Model tests on pipe pile penetration by using transparent soils