Abstract:Solid-oxide fuel cells (SOFCs) technology has a substantial potential in the application of clean and efficient electric power generation. However, the widespread utilization of SOFCs has not been realized because the cost associated with cell fabrication, materials and maintenance is still too high. To increase its competitiveness, lowering the operation temperature to the intermediate range of around 500–800°C is one of the main goals in current SOFCs research. A major challenge is the development of cell materials with acceptably low ohmic and polarization losses to maintain sufficiently high electrochemical activity at reduced temperatures. During the past few decades, tremendous progress has been made in the development of cell materials and stack design, which have been recently reviewed. SOFCs are fabricated from ceramic or cermet powders. The performances of SOFCs are also closely related to the ways in which the cell materials are processed. Therefore, the optimization of synthetic processes for such materials is of great importance. The conventional solid-phase reaction method of synthesizing SOFCs materials requires high calcination and sintering temperatures, which worsen their microstructure, consequently, their electrochemical properties. Various wet chemical routes have recently been developed to synthesize submicro- to nano-sized oxide powders. This paper provides a comprehensive review on the advanced synthesis of materials for intermediate-temperature SOFCs and their impact on fuel cell performance. Combustion, co-precipitation, hydrothermal, sol–gel and polymeric-complexing processes are thoroughly reviewed. In addition, the parameters relevant to each synthesis process are compared and discussed. The effect of different processes on the electrochemical performance of the materials is evaluated and optimization of the synthesis processes is discussed and some emerging synthetic techniques are also briefly presented.

History of high temperature fuel cell development

Experimental Study on High-Efficiency Microtubular Solid Oxide Fuel Cell Stacks Using Various Fuels

Fundamental mechanisms limiting solid oxide fuel cell durability

Advances, aging mechanisms and lifetime in solid-oxide fuel cells

The Progress on Research and Development of Tubular Solid Oxide Fuel Cell Stacks

Recent Progress on Advanced Materials for Solid‐Oxide Fuel Cells Operating below 500 °C

Fuel cells: Materials needs and advances

Flat-tubular solid oxide fuel cells and stacks: a review

Review of solid oxide fuel cell materials: cathode, anode, and electrolyte

Failure Mechanism and Optimization of Metal-Supported Solid Oxide Fuel Cells

Advances in Cathode Materials for Solid Oxide Fuel Cells: Complex Oxides without Alkaline Earth Metal Elements

Review of the electrolyte materials in medium or low temperature solid oxide fuel cell

The composite electrolyte materials for low-temperature solid oxide fuel cell

Development of Metal-supported Solid Oxide Fuel Cells

Improvement on Durability and Thermal Cycle Performance for Solid Oxide Fuel Cell Stack with External Manifold Structure

Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells

A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools

Advances in Solid Oxide Fuel Cell Technologies: Lowering the Operating Temperatures Through Material Innovations

Solid oxide fuel cell: Decade of progress, future perspectives and challenges

Study and Performance Test of 10 Kw Molten Carbonate Fuel Cell Power Generation System

The Optimal Design of Solid Oxide and Molten Carbonate Fuel Cells Integration with a CO2 Recycling Unit: an Attempt to Reach a Clean Transition Process