Abstract:Microstructure evolution, phase development and mechanical property of AZ80 alloy cup with various processing temperatures (573 K, 613 K, 653 K) and rotating revolutions (N = 0, 5, 50, 100) during rotating backward extrusion (RBE) were explored. The study founded that reducing deformation temperature or increasing revolution could promote the grain refinement and DRX proportion. And the sample deformed at the condition of 573 K and N = 100 exhibited the best grain refinement effect (grain size was 2.5 μm, DRX ratio was up to 99.01%). The bulk eutectic phase existed at all deformation temperatures, while the dynamic precipitation was only precipitated at temperature of 573 K and 613 K. Increasing the deformation temperature or revolution could reduce the proportion of the second phase. And an increase in revolution or a reduction of temperature would reduce the average size of second phase, due to the phase could be broken by large strain and resolved with elevated temperature. Moreover, increasing the revolution and deformation temperature could promote the texture weakening, which would be contributed to the occurrence of new recrystallization grains with random orientation and the activation of non-basal slip system. The mechanical property of microhardness was significantly improved with rotating revolution increasing and deformation temperature decreasing. Supported by the grain refinement and dispersion strengthening, the sample deformed at condition of 573 K and N = 100 achieved maximum hardness values of 96.3 HV. Graphical

Study on Backward Extrusion of Large-Sized and Hollow Cup Using High-Strength Al-Zn-Mg-Cu Alloy

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Evolution of Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy by Extrusion and Heat Treatment

High-Temperature Mechanical Behavior of an As-Extruded Al-5Zn-2Mg-0.3Cu (in wt.%) Alloy

Evolution of Microstructure and Mechanical Properties of Mg-3Al-1Zn Alloy Through the Corner of a Deep Cup-Shaped Forged Part

Effect of temperature on the microstructure and mechanical properties of Mg-Gd-Y-Zn-Zr alloy during the large height-to-diameter ratio upsetting and extrusion

Investigation on corrosion behavior and mechanical properties of an extruded Mg-Zn-Al-Sn-Mn alloy

Effect of extrusion temperature on microstructure, mechanical properties, and deformation mechanism of Mg-2.5Er-0.6Zr alloy

The evolution of microstructure and texture of AZ80 Mg alloy cup-shaped pieces processed by rotating backward extrusion

Effect of Temperature and Revolution on the Microstructure, Texture and Microhardness of the AZ80 Alloy Cup Prepared by Rotating Backward Extrusion

Effects of Temperature Distribution on Microstructure and Mechanical Properties of Hot Extruded Al–Zn–Mg–Cu Alloy Pipe with Variable Cross-Section

Investigation into the Extrudability of a New Mg-Al-Zn-RE Alloy with Large Amounts of Alloying Elements

Effect of backward extrusion on microstructure and mechanical properties of Mg-Gd based alloy

Effect of Zn/Mg ratio on the microstructure and properties of Al-xZn-2.0Mg-1.0Cu-0.2Zr-yTi ultrahigh-strength aluminum alloy extrusion

Microstructure evolution, strengthening mechanisms and deformation behavior of high-ductility Mg−3Zn−1Y−1Mn alloy at different extrusion temperatures

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Study on the effect of enhanced magnesium and copper contents on microstructure and property of Al-Zn-Mg-Cu alloys with high zinc element content during fabrication processes

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips

Effect of Extrusion Process on Microstructure, Corrosion Properties, and Mechanical Properties of Micro-Alloyed Mg–Zn–Ca–Zr Alloy

Microstructural evolution and mechanical properties of an ultrahigh-strength Al−Zn−Mg−Cu alloy via powder metallurgy and hot extrusion