Abstract:Ordinary Portland cement (OPC) is the most common curing agent for solidification/stabilization (S/S) of fly ash (FA), however, the treatment is not efficient. This study aims to investigate the S/S of FA with the modified calcium aluminate cement (CAC) as a binder. The modified CAC was obtained by adding sodium dihydrogen phosphate (NaH 2 PO 4 ), an inorganic chemical agent, and sodium diethyl dithiocarbamate (DDTC), an organic chemical agent, into CAC. Toxicity characteristic leaching procedure and unconfined compressive strength (UCS) test were carried out to evaluate the treatment effect of the proposed binder. The sequential extraction procedure (SEP), X-ray diffraction and scanning electron microscopy (SEM) were used to study the chemical speciation , mineralogical characterization and microstructure of the solidified/stabilized FA. The treatment results of pure CAC and OPC showed that the immobilizing efficiency of CAC was much higher than that of OPC. When curing with 10% CAC and 1% DDTC, the leaching concentrations of Cd, Pb and Zn decreased to 0.06, 0.12 and 18.95 mg/L, respectively. With the combination of 10% CAC and 0.5% DDTC + 0.5% NaH 2 PO 4 , the leaching concentrations of Cd, Pb and Zn were 0.12, 0.16 and 10.21 mg/L, respectively. The regulated leaching limits can be met under both of the above combinations. The UCS of the solidified body was 3.02 MPa under the combination of CAC + NaH 2 PO 4 + DDTC, which was much higher than the 1.34 MPa of the CAC + DDTC combination. SEP shows that most unstable forms of Cd, Pb and Zn in FA were converted to stable forms after the treatment by modified CAC. The immobilization mechanisms of the proposed binder included encapsulation of heavy metals and the formation of heavy metal complexes or precipitate. The CAC hydration products, the precipitate and complexes reduced the pores in FA particles and therefore reduced the leachability of heavy metals. This study demonstrated the effectiveness of the proposed modified CAC as a binder for FA treatment. As NaH 2 PO 4 is inexpensive than DDTC, the scheme of CAC + NaH 2 PO 4 + DDTC is recommended.

Enhanced immobilization of metal pollutants in sewage sludge ash (SSA)-cement pastes by calcium chloride and nitrate: Experimental and DFT studies

Understanding the Role of Calcium Silicate Slag in Sodium Carbonate-Activated Green Materials: Influence on Kinetics, Strength, and Efflorescence

Effect of sewage sludge ash on mechanical properties, drying shrinkage and high-temperature resistance of cement mortar

Studying the effectiveness of sewage sludge ash and its combination with natural pozzolans in controlling alkali–silica reaction

Recycling use of sulfate-rich sewage sludge ash (SR-SSA) in cement-based materials: Assessment on the basic properties, volume deformation and microstructure of SR-SSA blended cement pastes

Utilization of Sintered Sludge Ash with Different Mechanical–Thermal Activation Parameters as a Supplementary Cementitious Material: Mechanical Properties and Life Cycle Assessment of Cement-Based Paste

Greener cementitious composites incorporating sewage sludge ash as cement replacement: A review of progress, potentials, and future prospects

3D printed concrete with sewage sludge ash: Fresh and hardened properties

Early crack resistance and life cycle assessment of seawater-mixed sintered sludge cement paste

High-efficient stabilization and solidification of municipal solid waste incineration fly ash by synergy of alkali treatment and supersulfated cement

Study on properties of sewage sludge cemented paste backfill and leaching mechanism of heavy metals

Sodium carbonate-enhanced calcium carbide slag activation of sewage sludge for the preparation of green cementitious materials

Stabilisation/solidification of municipal solid waste incineration fly ash by phosphate-enhanced calcium aluminate cement

Mechanical performance and thermal stability of hardened Portland cement-recycled sludge pastes containing MnFe2O4 nanoparticles

Influence of Cement Replacement with Sewage Sludge Ash (SSA) on the Heat of Hydration of Cement Mortar

The Long-Term Performance of Concrete Amended with Municipal Sewage Sludge Incineration Ash

Effect of long-term dry–wet circulations on the Solidification/stabilization of Municipal solid waste incineration fly ash using a novel cementitious material

Engineering and microstructure properties of contaminated marine sediments solidified by high content of incinerated sewage sludge ash

Mechanical Properties and Hydration Degree of Magnesium Potassium Phosphate Cement Modified by Sintered Silt Ash

Immobilization and recycling of contaminated marine sediments in cement-based materials incorporating iron-biochar composites

Solidification/Stabilization of Waste Incineration Fly Ash by Modified Calcium Aluminate Cement