Abstract:Purpose To evaluate the effect of light-cured resin cement application based on etching and silanization on the translucent property of ceramic veneers in different thicknesses, testing the hypothesis that the surface treatment and subsequent resin cement application could influence the translucency of ceramic veneers. The relationship between translucency of ceramic veneers and light transmission irradiated by LED polymerization units was also determined. Materials and Methods 40 specimens (10 mm diameter) were fabricated from IPS e.max Press HT A2 ceramic ingots, and polished to 0.3 +/- 0.01 mm, 0.5 +/- 0.01 mm, 0.7 +/- 0.01 mm, 1.0 +/- 0.01 mm, and 1.5 +/- 0.01 mm thick (n = 8/group). One surface of each disc was etched with HF acid, silanized with Monobond-S, and applied with a light-cured resin cement (Variolink N Transparent Base). Before and after the above procedure, the total luminous transmittance (tau) of all specimens was assessed by a spectrophotometer in a wavelength range of 380-780 nm. A handheld radiometer was used to measure the light intensity irradiated by three LED polymerization units. Light transmission (LT) through ceramic specimens after resin cement application was calculated. Data were statistically analyzed using two-way ANOVA (p = 0.05) and Tukey's test. The correlation between translucency (tau) of ceramic veneers after resin cement application and light transmission (LT) of curing units was statistically evaluated using Spearman correlation test (p = 0.05). Results With the increase of ceramic thickness, the transmittance decreased significantly (p < 0.05). For the 0.3-mm, 0.5-mm, and 0.7-mm-thick groups, the transmittance of ceramic specimens was statistically significantly lower after resin cement application (p < 0.05). The r value of Bluephase C8 was 0.988, 0.977 for Bluphase, and 0.883 for Bluephase 20i, indicating that the light transmission (LT%) was positively correlated to the translucency of ceramic veneers, regardless of the type of curing units. Conclusion After the light-cured resin cement application based on etching and silanization, the ceramic veneers (less than 0.7-mm thick) were less translucent, and the translucency decreased when the thickness increased. Because of the lower translucency of ceramic veneers, the light intensity of LED units transmitted to resin layer would decrease when curing.

Exploring the influence of tooth, ceramic, and resin luting agent variations on laminate veneer optical characteristics: a prospective clinical investigation

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

Exploring the optical behavior and relative translucency parameter of CAD-CAM resin-based composites, polymer-infiltrated ceramic network, and feldspar porcelain

Evaluation of the ceramic laminate veneer-tooth interface after different resin cement excess removal techniques

Effects of Substrate and Cement Shade on the Translucency and Color of CAD/CAM Lithium-Disilicate and Zirconia Ceramic Materials

Ultra-Translucent Zirconia Laminate Veneers: The Influence of Restoration Thickness and Stump Tooth-Shade

The effect of ceramic thickness and resin cement shades on the color matching of ceramic veneers in discolored teeth

Influence of the composition and shades of ceramics on light transmission and degree of conversion of dual-cured resin cements

Fluorescence intensity of composite resin for direct veneer removal using a fluorescence‐aided identification technique

Effect of Optical Properties of Lithium Disilicate Glass Ceramics and Light-Curing Protocols on the Curing Performance of Resin Cement

Clinical performance of laminate veneers: A review of the literature

Preheated restorative composite resin for luting ceramic laminate veneers: An optimized technique report

Spectrophotometric analysis of clinical factors related to the color of ceramic restorations: A pilot study

Influence of Ceramic Thickness on Mechanical Properties and Polymer Structure of Dual-Cured Resin Luting Agents.

Digital Image Analysis of Fluorescence of Ceramic Veneers with Different Ceramic Materials and Resin Cements.

Effect of Light-Cured Resin Cement Application on Translucency of Ceramic Veneers and Light Transmission of LED Polymerization Units.

Comparative Evaluation of Two Different Preparation Designs and Materials on the Fracture Resistance of Laminate Veneers: An In Vitro Study

Impact of background on color, transmittance, and fluorescence of leucite based ceramics

Shade selection for natural tooth color replication on porcelain laminate veneers

Effects of CAD/CAM restorative materials and thickness on the depth of cure of various light-cured resin composite materials

Randomized clinical trial of zirconia laminate veneers sintered by using conventional versus speed process: 1-year follow-up