Abstract:Statement of problem. The impact of different surface treatments and shades on the color, translucency, and surface roughness of high-translucency self-glazed zirconia materials is unclear. Purpose. The purpose of this in vitro study was to investigate the effects of different external surface treatments (self-glazed, milled, polished, and glazed), intaglio surface treatments (milled and airborne-particle abraded), and shades (A1 and A3 shades) on the color, translucency, and surface roughness of high-translucency self-glazed zirconia materials, as well as the correlations among optical parameters, translucency, and surface roughness. Material and methods. Eighty shade A1 and 80 shade A3 disks were fabricated with a thickness of 0.80 +/- 0.02 mm and divided into 16 groups (n=10). Different external and intaglio surface treatments were applied to the specimens. CIELab values were measured with a spectrophotometer, and color differences (Delta E-00) and relative translucency parameter (RTP) were calculated. Total transmittance (Tt%) and reflectance (R%) were tested with a spectrophotometer equipped with an integrating sphere. Surface roughness (Ra and Rz) (mu m) was measured with a noncontact 3-dimensional laser scanning microscope. One specimen from each group was subjected to scanning electron microscope (SEM) examination. Data were analyzed with ANOVA and the Tukey post hoc test. The correlation among optical parameters, translucency, and surface roughness was investigated by using Pearson correlation analysis (alpha=.05). Results. The effects of external surface treatments, intaglio airborne-particle abrasion, and shades on Delta E-00, RTP, and Ra values of the disks were significantly different (P<.001). The smoothest external polishing surface had the greatest RTP and color difference (P<.001). Shade A3 disks had lower RTP and Tt% values than shade A1 disks (P<.001). Delta E-00 had a highly positive relationship with the RTP (A1: r=0.884, P<.001; A3: r=0.859, P<.001). SEM images demonstrated that surface treatments affected the surface texture of monolithic zirconia ceramics. Conclusions. Different surface treatments affected the surface roughness, translucency, and final color of zirconia materials. The smoothest external polishing surface had the greatest RTP and color difference. Different shades influenced the translucency, as the darker the disk shade, the lower the translucency. The RTP was appropriate as an auxiliary indicator for evaluating the color of a dental ceramic.

Impact of background on color, transmittance, and fluorescence of leucite based ceramics

Influence of Restoration Thickness and Resin Cement on Translucency and Color of Different Types of Monolithic Zirconia and Lithium Disilicate Ceramic

Effects of Substrate and Cement Shade on the Translucency and Color of CAD/CAM Lithium-Disilicate and Zirconia Ceramic Materials

Assessment of color stability and translucency of various CAD/CAM ceramics of different compositions and Thicknesses: An in vitro study

Spectrophotometric analysis of clinical factors related to the color of ceramic restorations: A pilot study

Color match of a feldspathic ceramic CAD-CAM material for ultrathin laminate veneers as a function of substrate shade, restoration color, and thickness

Effect of cement type, luting protocol, and ceramic abutment material on the shade of cemented titanium-based lithium disilicate crowns and surrounding peri-implant soft tissue: a spectrophotometric analysis

Exploring the optical behavior and relative translucency parameter of CAD-CAM resin-based composites, polymer-infiltrated ceramic network, and feldspar porcelain

Influence of microstructure on optical properties of CAD-CAM lithium disilicate glass-ceramics

Influence of the composition and shades of ceramics on light transmission and degree of conversion of dual-cured resin cements

Quantitative Analysis of the Color in Six CAD-CAM Dental Materials of Varied Thickness and Surface Roughness: an in Vitro Study.

Light transmittance and surface roughness of a feldspathic ceramic CAD-CAM material as a function of different surface treatments

Color influence of heat pressed ceramic by core build-up resin composite

Effect of different surface treatments on optical, colorimetric, and surface characteristics of a lithium disilicate glass-ceramic

Masking ability of CAD-CAM resin-matrix ceramics with different translucencies and thicknesses combined with four cement shades against varying background colors when facing veneer restorations

Influence of Different Cements on the Color Outcomes of Titanium-Based Lithium Disilicate All-Ceramic Crowns and Peri-implant Soft Tissue.

Effect of surface roughness and biofilm formation on the color properties of resin-infiltrated ceramic and lithium disilicate glass-ceramic CAD-CAM materials

The impact of various substrates, ceramic shades, and brands on the ultimate color and masking capacity of highly translucent monolithic zirconia: an in vitro study

Effects of Surface Treatment and Shade on the Color, Translucency, and Surface Roughness of High-Translucency Self-Glazed Zirconia Materials

The effect of ceramic thickness and resin cement shades on the color matching of ceramic veneers in discolored teeth

The effect of coloring liquids on the translucency of zirconia framework