Abstract:This work, realized in the framework of the European project TurboNoiseBB, presents an advanced aeroacoustic design methodology of Outlet Guide Vanes (OGVs) with leading edge serrations, including details on their broadband noise and aerodynamic performance. The serrated OGV corresponds to a modified stator from an aeroengine fan stage tested at the AneCom AeroTest's facility (Germany). Sinusoidal leading edge patterns with varying amplitude and wavelength along the span are designed in collaboration with Safran Aircraft Engines. Serrations are adjusted to account for the turbulence characteristics provided by Reynolds-Averaged Navier–Stokes (RANS) calculations. Optimal parameters are found using simple design rules discussed in this paper. Down selection of serrated OGV designs (patent pending) is conducted through a RANS control of aerodynamic performances and in accordance with industrial specifications, ensuring acceptable penalties on the loss coefficient and isentropic efficiency. Broadband noise simulations are performed using a computational aeroacoustic (CAA) code that solves the linearized Euler equations with a synthetic turbulence model. Additionally, the acoustic response of the serrated leading edge airfoils is also estimated using the most relevant analytical formulation in the literature, based on the Wiener–Hopf technique. Numerical predictions at approach conditions are compared to available experimental measurements (on the untreated baseline case) and analytical Amiet-based and Wiener–Hopf solutions, showing satisfactory agreement in the sound power spectrum in the bypass duct. Finally, the acoustic performances estimated at the design stage are numerically assessed by both the CAA and Wiener–Hopf methods, providing around 2.5 dB and 3.5 dB reduction in the overall power level, respectively.

Silencer nozzle vanes, mounted on the suction side of the compressor of a turbo-compressor driven by the exhaust gas

Silencer for high-frequency turbocharger compressor noise via an acoustic straightener

Numerical Simulation and Structure Optimization of Compressor Muffler

Noise Reduction Design of the Volute for a Centrifugal Compressor

Centrifugal compressor having air removal jet box structure

Noise control of a twin-screw refrigeration compressor

Aeroacoustic design and broadband noise predictions of a fan stage with serrated outlet guide vanes

Centrifugal compressor with inlet guide blades and turbocharger

Study On Acoustic Performance Of A Water Muffler For Gear Pump

Experimental Investigation On Soft Structured Passage And Suction Muffler Of Compressor

Cyclonic dirt separator turbine accelerator

Drum silencer with shallow cavity filled with helium

Experimental and numerical study of high-intensity sound in the cavity between rotator and stator of high- pressure compressor

A novel design for cruiser type motorcycle silencer based on micro perforated elements

Controllable profile vaneless diffuser for centrifugal compressor

Design of Turbocharger Variable Nozzle

Prediction and Evaluation of Acoustic Performance of Silencer for Turbocharger Outlet

Centrifugal air compressor adopting non-linear distribution of area-radius ratio (A/r) of volute passage section

A Resonator Noise Reduction Solution for a Centrifugal Gas Compressor

Blade forward-swept centrifugal compressor and turbocharger

Control of noise generated from centrifugal refrigeration compressor