Abstract:Due to the escalating demands for computational power, coupled with a continuous reduction in the size of electronic packaging, thermal management for electronic devices has become increasingly critical in recent years. Ensuring that the temperature of electronic chips remains below a certain threshold is essential, since overheating can result in a decline in performance and chip breakdowns. To address the intensive cooling needs of heat-emitting chips, a variety of devices and methods have been explored, such as heat pipes, vapor chambers, pool boiling, spray cooling, and jet impingement cooling. Tailoring thermal and chemical characteristics of the target heated surface is one of the key factors in enhancing heat removal efficiency. This study highlights the critical role of employing advanced surface engineering techniques which particularly focuses on the integration of a novel semi-layered microporous copper structure, developed in conformity with a multi-level micro-cubic pin fin silicon substrate. The semi-layered microporous copper structure is fabricated using polystyrene sphere as the template to assist the electrodeposition of copper, with a low current density being employed to ensure meticulous fabrication. The initial gradient of the muti-level substrate is defined using silicon dioxide as the mask, setting the depth to encapsulate the PS template effectively. This foundational layer is crucial for confining the PS template securely in place. The second gradient is defined using photoresist as the mask to etch micro pin fin structures into the substrate, aimed at enhancing the adhesion between the substrate and the PS template and expand the heat exchange area. This meticulous structuring prevents the template from detaching during large-scale electroplating operations, ensuring the integrity of the micro fabrication process. The semi-layered microporous copper and the multi-level micro-cubic pin fin silicon substrate are both strategically designed to augment nucleation sites and enlarge the heat exchange surface area during the boiling heat transfer process within a pool boiling system. Further enhanced by the jet flow disturbances aimed directly at the heat transfer surface, facilitating rapid bubble removal and liquid replenishment, which contributes to delaying the onset of dry out. By employing Novec 649 as the coolant under a jet flow rate of 2.5L/min, we've reached a critical heat flux of 90/Wcm2 on a semi-layered microporous copper structure over a large heated area of 1.5 x 1.5 cm. This research provides valuable knowledge that can inform the development of highly effective surface engineering designs in high heat flux management systems.

Increasing Heat Transfer from Metal Surfaces through Laser-Interference-Induced Microscopic Heat Sinks

Heating influence on hierarchical structures fabricated by direct laser interference patterning

Enhancement of Heat Dissipation by Laser Micro Structuring for LED Module

Enhancement of Metal Boiling Heat Transfer Performance on Micro-Nano Structure Surface Prepared by Femtosecond Laser

Ultrahigh Heat Transfer Enhancement by Nano- and Micro-Scale Structure Formed on Surface

107 Collaborative Project of Heat Transfer Enhancement by Nano- and Micro-Scale Porous Layers Formed on Surface

Ultrahigh heat transfer enhancement using nano-porous layer

Enhancing heat transfer at low temperatures by laser functionalization of the inner surface of metal pipes

Enhanced thermal conduction through nanostructured interfaces

Micro-structured lateral thermal lens for increased output power and narrowed beam divergence in kilowatt-class 9xx nm diode laser bars

Enhancement of flow boiling heat transfer by laser-induced periodic surface structures using femtosecond laser

Multipronged heat-exchanger based on femtosecond laser-nano/microstructured Aluminum for thermoelectric heat scavengers

Design of micro-nano structures for counter flow diverging microchannel heat sink with extraordinarily high energy efficiency

Investigations of Energy Conversion and Surface Effect for Laser-Illuminated Gold Nanorod Platforms

Study on Laser-Controlled Surface Preparation and Condensation Heat Transfer Characteristics of Copper-Based Micro-Nano Structure Surface

Evaporative and Wicking Functionalities at Hot Airflows of Laser Nano-/Microstructured Ti-6Al-4V Material

Convection, Heat Generation and Particle Deposition in Direct Laser Writing of Metallic Microstructures

Laser Microstructuring of Extremely-Thin Vapor Chamber with Hybrid Configuration for Excellent Heat Dissipation

Pool Boiling Enhancement Via Surface Engineering for Thermal Management

Minimizing Interface Thermal Resistance Via Laser Surface Micropatterning for Enhancing Wetting of Gallium-Based Liquid Metal with Copper

Experimental study of dielectric liquid spray cooling on multi-scale structured surfaces inspired by leaf veins