Abstract:In this paper, we report the pool boiling experimental results for significant enhancements in the boiling heat transfer coefficient (BHTC) and CHF on various microporous surfaces. The microporous surfaces were fabricated by metal (Copper) powder sintering process, and nanostructured porous surfaces were additionally fabricated through the thermal oxidation of the metal porous surfaces. Among the examined substrates, a boiling surface with a thin metal porous layer and millimeter-sized porous pillar structures exhibited optimal boiling performance; the BHTC and CHF of the microporous surface were measured to be approximately 500 % and 270 % higher than those of a smooth reference surface, respectively. We conjecture that the results come from the combined effect of active nucleation site density enhancement, capillary wicking promotion, and separation of liquid-vapor flow paths on the microporous surface with porous pillars. On the other hands, the porous pillar surface with needle-like nanostructures showed the interesting phenomena that can be regarded to the recovery of the boiling regime from transition boiling to nucleate boiling. At the CHF, the temperature increase on the surface was slower than that on the other surfaces. Additionally, at high heat fluxes below the CHF, the overheated surface self-recovered to the nucleate boiling state, indicating the rewetting of local dry spots. We consider that the capillary wicking capability strongly improved by the nanostructures on the surface was presumably responsible for inhibiting the irreversible expansion of local dry spots. From the experimental observations throughout this study, we propose the following key requirements to design an ideal boiling surface: increasing the nucleation site density, ensuring a liquid supply path by capillary wicking, separating the liquid and vapor flow paths, and improving the liquid wettability of the solid surface by forming nanostructures.

Ultrahigh Heat Transfer Enhancement by Nano- and Micro-Scale Structure Formed on Surface

Ultrahigh Heat Transfer Enhancement by Nano-particle Porous Layer Formed on Surface

Ultrahigh heat transfer enhancement using nano-porous layer

107 Collaborative Project of Heat Transfer Enhancement by Nano- and Micro-Scale Porous Layers Formed on Surface

Ultrahigh Heat Transfer Enhancement by Nano- and Micro Porous Layer

Consideration of Heat Transfer Enhancement Mechanism Using Nano- and Micro-Scale Porous Layer

Consideration of Heat Transfer Enhancement Mechanism of Nano- and Micro-Scale Porous Layer Via Flow Visualization

Boiling and quenching heat transfer advancement by nanoscale surface modification

Materials, Fabrication, and Manufacturing of Micro/Nanostructured Surfaces for Phase-Change Heat Transfer Enhancement

Enhanced Phase‐Change Heat Transfer by Surface Wettability Control

Effects of Nanometer Scale Structure on Energy Transfer Between a Surface and Fluid Molecules

Nanoengineering-Enhanced Capillary Cooling Achieves Sustained Thermal Protection for Ultra-High Heat Flux and Temperature

Hybrid Micro-Nano Structured Thermal Interfaces for Pool Boiling Heat Transfer Enhancement

Boiling performance enhancement and self-recovery of nucleate boiling regime on micro- and nanostructured porous surfaces

Enhancement of Metal Boiling Heat Transfer Performance on Micro-Nano Structure Surface Prepared by Femtosecond Laser

Heat Transfer Enhancement Using Al2O3-MWCNT Hybrid-Nanofluid inside a Tube/Shell Heat Exchanger with Different Tube Shapes

Phenomenon and Mechanism of Spray Cooling on Nanowire Arrayed and Hybrid Micro/Nanostructured Surfaces

Nanoengineering Scalephobic Surfaces for Liquid Cooling Enhancement

Increasing Heat Transfer from Metal Surfaces through Laser-Interference-Induced Microscopic Heat Sinks

Heat transfer enhancement by natural convection in a partially porous annular space between two coaxial cylinders saturated by Cu–water nanofluid

Surface Engineering for Phase Change Heat Transfer: A Review