Abstract:With the help of the Kirkendall effect at the SiO/SiO2 interface, multi‐Si‐void@SiO2 can be obtained by simply heat treating Si powder in air at ≈950 °C for an appropriate time. The electrode made by mixing multi‐Si‐void@SiO2 and commercial carbon (mass ratio, 1:1) delivers a specific capacity of 1440 mAh g−1 at 1.2 A g−1 after 500 cycles. The core‐void@shell architecture shows great advantages in enhancing cycling stability and high‐rate performance of Si‐based anodes. However, it is usually synthesized by template methods which are complex and environmentally unfriendly and would lead to low‐efficiency charge and mass exchange because of the single‐point van der Waals contact between the Si core and the shell. Here, a facile and benign one‐step method to synthesize multi‐Si‐void@SiO2 structure, where abundant void spaces exist between multiple Si cores that are multi‐point attached to a SiO2 shell through strong chemical bonding, is reported. The corresponding electrode exhibits highly stable cycling stability and excellent electrochemical performance. After 200 cycles at a current density of 0.1 A g−1 and then another 200 cycles at 1.2 A g−1, the electrode outputs a specific capacity of 1440 mAh g−1. Even at 2.0 A g−1, it outputs a specific capacity as high as 1182 mAh g−1. Such an anode can match almost all the cathode materials presently used in lithium‐ion batteries. These results demonstrate the multi‐Si‐void@SiO2 as a promising anode to be used in future commercial lithium‐ion batteries of high energy density and high power density.

One-step Chemical Vapor Deposition Synthesis of Si NWs@C core/shell anode without additional catalysts by the Oxide-Assisted Growth mechanism for Lithium-ion Batteries

CoO/NiSi(x) Core-Shell Nanowire Arrays As Lithium-Ion Anodes with High Rate Capabilities.

A novel Co-Li2O@Si core-shell nanowire array composite as a high-performance lithium-ion battery anode material.

Litchi-structural Core–shell Si@C for High-Performance Lithium–ion Battery Anodes

Facile Synthesis of Uniform Mwcnt@Si Nanocomposites As High-Performance Anode Materials for Lithium-Ion Batteries

In Situ Wrapping Si Nanoparticles with 2D Carbon Nanosheets As High-Areal-Capacity Anode for Lithium-Ion Batteries.

Metal-organic Frameworks-Derived CoMOF-D@Si@C Core-Shell Structure for High-Performance Lithium-Ion Battery Anode

Large-Scale Synthesis Of Si@C Three-Dimensional Porous Structures As High-Performance Anode Materials For Lithium-Ion Batteries

SiC@Si core–shell nanowires on carbon paper as a hybrid anode for lithium-ion batteries

Hierarchical Carbon Shell Compositing Microscale Silicon Skeleton As High-Performance Anodes for Lithium-Ion Batteries

One‐Step Synthesis of Multi‐Core‐Void@Shell Structured Silicon Anode for High‐Performance Lithium‐Ion Batteries

Cu-Li2o@Si Core-Shell Nanowall Arrays: Facile Voltage-Controlled Synthesis and Enhanced Lithium-Storage Capabilities

Directing Silicon-Graphene Self-Assembly As a Core/shell Anode for High-Performance Lithium-Ion Batteries.

Preparation of Silicon@Silicon Oxide Core-Shell Nanowires from A Silica Precursor Toward A High Energy Density Li-Ion Battery Anode

Si@Nitrogen-Doped Carbon Nanoparticles for Lithium-Ion Battery Anodes

“Nano-Skeleton” Si-SiOx@C Anodes towards Highly Stable Lithium-ion Batteries

Voltage-controlled synthesis of Cu–Li2O@Si core–shell nanorod arrays as high-performance anodes for lithium-ion batteries

A Stable Core–Shell Si@SiOx/C Anode Produced via the Spray and Pyrolysis Method for Lithium-Ion Batteries

High performance lithium ion battery anodes based on carbon nanotube-silicon core-shell nanowires with controlled morphology

Carbon-silicon core-shell nanowires as high capacity electrode for lithium ion batteries

Micro-sized nano-porous Si/C anodes for lithium ion batteries