Abstract:Stability and high energy densities are essential qualities for emerging battery electrodes. Because of its high specific capacity, silicon has been considered a promising anode candidate. However, the several-fold volume changes during lithiation and delithiation leads to fractures and continuous formation of an unstable solid-electrolyte interphase (SEI) layer, resulting in rapid capacity decay. Here, we present a carbon-silicon-carbon (C@Si@C) nanotube sandwich structure that addresses the mechanical and chemical stability issues commonly associated with Si anodes. The C@Si@C nanotube array exhibits a capacity of ∼2200 mAh g(-1) (∼750 mAh cm(-3)), which significantly exceeds that of a commercial graphite anode, and a nearly constant Coulombic efficiency of ∼98% over 60 cycles. In addition, the C@Si@C nanotube array gives much better capacity and structure stability compared to the Si nanotubes without carbon coatings, the ZnO@C@Si@C nanorods, a Si thin film on Ni foam, and C@Si and Si@C nanotubes. In situ SEM during cycling shows that the tubes expand both inward and outward upon lithiation, as well as elongate, and then revert back to their initial size and shape after delithiation, suggesting stability during volume changes. The mechanical modeling indicates the overall plastic strain in a nanotube is much less than in a nanorod, which may significantly reduce low-cycle fatigue. The sandwich-structured nanotube design is quite general, and may serve as a guide for many emerging anode and cathode systems.

High performance lithium ion battery anodes based on carbon nanotube-silicon core-shell nanowires with controlled morphology

Carbon-silicon core-shell nanowires as high capacity electrode for lithium ion batteries

A novel Co-Li2O@Si core-shell nanowire array composite as a high-performance lithium-ion battery anode material.

Litchi-structural Core–shell Si@C for High-Performance Lithium–ion Battery Anodes

CoO/NiSi(x) Core-Shell Nanowire Arrays As Lithium-Ion Anodes with High Rate Capabilities.

Branched Co3O4/Fe2O3 Nanowires As High Capacity Lithium-Ion Battery Anodes

Vertically ordered Ni 3Si 2/Si nanorod arrays as anode materials for high-performance Li-ion batteries

Crystalline-amorphous Core-Shell Silicon Nanowires for High Capacity and High Current Battery Electrodes.

Chelation-Assisted formation of carbon nanotubes interconnected Yolk-Shell Silicon/Carbon anodes for High-Performance Lithium-ion batteries

Flexible Carbon Nanotubes Confined Yolk-Shelled Silicon-Based Anode with Superior Conductivity for Lithium Storage

Carbon-coated Silicon Nanotube Arrays on Carbon Cloth As a Hybrid Anode for Lithium-Ion Batteries

Silicon/Carbon Nanoparticles Assembled with Multifunction Carbon Nanotubes/Sheets as High-Performance Anode of Lithium-Ion Batteries

Mechanically and chemically robust sandwich-structured C@Si@C nanotube array Li-ion battery anodes

Sandwich-like CNTs/Si/C nanotubes as high performance anode materials for lithium-ion batteries

CNTs-intertwined and N-doped porous carbon wrapped silicon anode for high performance lithium-ion batteries

Ni x Mn y Co z O Nanowire/CNT Composite Microspheres with 3D Interconnected Conductive Network Structure via Spray-Drying Method: A High-Capacity and Long-Cycle-Life Anode Material for Lithium-Ion Batteries.

SiC@Si core–shell nanowires on carbon paper as a hybrid anode for lithium-ion batteries

Improving the Performance of Micro-Silicon Anodes in Lithium-Ion Batteries with a Functional Carbon Nanotube Interlayer

Core-shell Si/C Nanocomposite As Anode Material for Lithium Ion Batteries

Coaxial Carbon–silicon–carbon Nanotube Arrays in Porous Anodic Aluminum Oxide Templates As Anodes for Lithium Ion Batteries

A Novel Strategy for Lithium-Ion Battery Anode with Enhanced Cycling Performance: Silicon Particles Enclosed in Shell-Like Mxenes/CNTs Nanostructure